Zoning solution for VRF systems
Easyzone is an all-in-one zoning solution for ducted inverter / variable refrigerant flow (VRF) systems. This highly efficient, easy-to-install solution ships as a pre-wired kit, including the thermally insulated motorized plenum, control board and plenum neck. Easyzone’s plenum neck provides custom mechanical adaptation for each compatible HVAC unit for maximum efficiency and true plug-and-play installation. Easyzone regulates the temperature in inverter/VRF systems with three to six zones independently on demand.
XG-AFL Series Linear Diffusers
Greenheck's XG-AFL Series of architectural high-capacity linear slot diffusers are designed for ceiling and sidewall installation in variable volume or constant volume air distribution systems. Available in single-section lengths up to 96 inches with one or two slots, versatile XG-AFL Series diffusers can be specified in various frame types and eight border configurations to complement any interior. Combination frames are also available for applications that require two different frame types on a single linear.
AX 200 series tubular inline and upblast fans
Greenheck has expanded its tubular inline fan product offering with the addition of the AX 200 Series tubular inline and upblast fans. Featuring medium-duty welded construction, a cast aluminum prop, and integral flanges for airtight duct connections, the direct drive AX 200 can be utilized in a wide variety of indoor or outdoor applications. The AX 200 upblast fan also incorporates a heavy-duty spun curb cap to reduce inlet losses, a butterfly damper section for backflow prevention, and a windband section to protect the butterfly dampers from debris.
Mobile containment unit for infection control in the healthcare industry
REMEDI8®, the national leader of fire protection and health and safety systems, highlights its HEPA-10X for infection control in high-risk healthcare settings. The HEPA-10X has been expertly designed for effective control and maximum efficiency. Its interior and exterior powder coating not only enables easy cleaning and maintenance but also maximizes the system’s durability, ensuring longevity.
M Series Commercial 4-inch Downlighting Collection
From grand outdoor entrances to lobbies, restaurants and guest rooms, the 4-inch aperture M Series Commercial recessed downlighting family meets all site requirements for a wide variety of applications with lumen packages ranging from 750 to 3500, while providing continuity in aesthetics and performance throughout varying ceiling heights. The design community now has one unique modular family to meet all application needs. The modular design with interchangeable modules, optics and trims, allow for easy serviceability and design changes, as they can be easily swapped onsite from below the ceiling from fixed to adjustable to wall wash. The modular design (housing, module and trim) of DMF products is an ideal serviceability solution as the drivers are integrated into the light engine modules versus the housing, so modules, equipped with quick connects, can be easily swapped out with below ceiling access, making serviceability quick and easy. The M Series Commercial non-insulated ceiling (IC) housings are offered in round and square apertures. The modules include Fixed Downlight and Adjustable (360-degree rotation and 40-degree tilt) and the tool-less field-interchangeable optics include 15-, 25-, 40-, 60- and 90-degrees distributions.
i-Vu Weather Forecasting Add-On
Carrier i-Vu weather forecasting add-on for the i-Vu building automation system enables intelligent control strategies based on real time outside air quality data, helping buildings adapt to changeable climate conditions. The i-Vu building automation system communicates with leading weather forecasting agencies, AccuWeather, the U.S. National Weather Service and Environment Canada, with the weather add-on. Ten-day hourly weather forecast data can be used to optimize energy efficiency indoors and the use of water in irrigation systems outdoors.
Solid polymer electrolyte to operate across a wide temperature range
Nuvvon's creation of a novel solid polymer electrolyte enables solid-state pouch cells to operate across a wide temperature range without external cooling or heating systems. The next-generation technology dispels the myth that solid polymer electrolytes have poor ionic conductivity at room temperature. Completely dry and not requiring the addition of ceramic materials, Nuvvon’s solid polymer electrolytes withstand temperatures of 212°F (100°C) without mechanical degradation and possess high ionic conductivity across a wide temperature range (2.2*10-4 S/cm at 32°F (0°C), 4.6*10-3 S/cm at 77°F (25°C), 6.6*10-3 S/cm at 176°F (80°C)). They are ionically conductive at room temperature and atmospheric pressure without liquids or gels and are compatible with lithium metal anode and high voltage cathodes. Applications of Nuvvon Polymer Technology Nuvvon’s unique polymer technology is designed for solid-state batteries used within high-power density and demanding applications such as consumer electronics, and electric vehicles.
22HL-50 Leak Detector Sensor
Belimo's 22HL-50 Leak Detector Sensor is engineered to detect liquid leaks in containers, drain pans, false floors, suspended ceilings and rooms. It features a single relay contact that can be wired to alert a control system, trigger an alarm, or close a valve to halt the flow of liquid. It has easy to read green/red “traffic light” status LEDs for clear visual indication of leaks.
Tripp Lite series Standby UPS
Providing simple, cost-effective power protection and battery backup, the new UPS is a compact, low-maintenance solution for applications such as retail point-of-sale (POS) systems, home networking equipment and bank ATMs. Built to operate in areas with uncontrolled temperature or humidity, the Eaton Tripp Lite series standby UPS offers durable construction, automatic restart after an outage and a variety of mounting options. Available in three models, the standby UPS is a versatile battery backup for SMBs and retail enterprises and is suitable for applications that include work-from-anywhere, casino gaming, classrooms and more.
Optically isolated photovoltaic driver provides floating power source
Littelfuse, Inc., an industrial technology manufacturing company empowering a sustainable, connected and safer world, announced the launch of the FDA117 Optically Isolated Photovoltaic Driver. This innovative product generates a floating power source, making it an exceptional choice for isolated switching applications in a wide range of industries. The FDA117 is specifically designed to control discrete standard power MOSFETs and IGBTs using a floating voltage source, ensuring isolation between the low-voltage drive input side and the high-voltage load output side. With an input control current range of 5 mA to 50 mA, an integrated fast turn-off circuitry, and 5 kVRMS reinforced isolation, the FDA117 provides sufficient voltage and current to drive discrete power MOSFETs and IGBTs effectively. One of the key differentiators of the FDA117 is its ability to generate a floating power source with up to 15.3 V voltage and 60 µA current, making it suitable for driving standard MOSFET devices and IGBTs.
eCAPS Bridge to Revit plug-in
Greenheck’s eCAPS Bridge to Revit plug-in allows users to seamlessly select and schedule Greenheck HVAC equipment without leaving the Revit environment. The eCAPS Bridge release includes access to additional Revit® content and more functionality. Dedicated outdoor air systems (DOAS) LOD 300 content can now be selected by performance.
SSA Series Current Shunt Resistors
Littelfuse, Inc. announced the launch of its SSA Series Current Shunt Resistors—the first of its kind in the Littelfuse portfolio. These two-terminal, ultra-low resistance shunt resistors are uniquely designed to meet the increasing demand for accurate current measurement in high-performance applications.
Core bore seal
DESCRIPTION The UNIQUE Core Bore Seal Firestop System is a revolutionary way to firestop, water and smoke-seal abandoned (empty) core holes in fire-rated concrete slabs and walls. No need to access the floor below during installation! Use our UNIQUE Core Bore Seal (CBS) Firestop System to cover, seal and firestop empty core holes in concrete slabs or walls during construction and post-construction. The Core Bore Seal Firestop System is completely removable if the abandoned core should need to be reclaimed sometime in the future.
DG350-DG500 Natural Gas Generator Sets
Cat DG350-DG500 natural gas generator sets deliver improved power density, fuel efficiency and emissions performance combined with Caterpillar’s renowned reliability and support. Now available from Cat dealers in North America for small- to medium-sized standby and demand response applications, the generator sets are factory certified by the U.S. Environmental Protection Agency (EPA) for use in non-emergency applications. Designed utilizing Caterpillar’s deep gas engine development expertise, the new generator sets deliver high power density and provide an optimal solution for numerous energy projects. Available in both standalone and modular parallel configurations, these generator sets offer improved fuel efficiency and extended annual run times, making them exceptional for energy management applications such as demand response programs that compensate large energy users for producing extra power during periods of peak demand and exporting it to the grid.
Resonix RGD Series Refrigerant Leak Detection Sensor
Sensata Technologies announced the launch of the Sensata Resonix RGD sensor, the first leak detection sensor with UL certification for multiple A2L refrigerant gases used in heating, ventilation, and air conditioning (HVAC) equipment. The new leak detection sensors support HVAC manufacturers’ transition to refrigerants with a lower global warming impact. Sensata’s Resonix RGD sensors leverage patented gas detection technology to meet the needs of HVAC manufacturers using new hydrofluoroolefin (HFO) refrigerants as part of a global shift away from hydro-fluorocarbon (HFC) refrigerants. HFC gases have been widely used in air conditioning and refrigeration equipment for decades due to their performance characteristics. However, HFC gases have a high global warming potential (GWP) – often hundreds of times more potent than carbon dioxide (CO2).
Lighting Guideway Series
The Guideway Series with NanoComfort Technology is a game-changing roadway solution that brings levels of performance, comfort, and control previously out of reach. The IP66-rated optical chamber is sealed with a durable glass lens that offers a larger optical surface area to further enhance uniformity and greatly reduce potential failure points compared to sealing each individual LED with an optic. The Guideway Series also boasts Cree Lighting’s largest array of color temperatures ever offered – 2200K, 2700K, 3000K, 4000K, 5700K, and coming soon, Wildlife-Friendly True Amber – along with five optical distributions to cover the full range of roadway applications.
FreshAir Smoking Sensors
Hyatt Place Miami Airport’s management struggled to identify unauthorized smoking and enforce the hotel’s no-smoking policies when guests complained of nearby smoking. The hotel’s General Manager, Craig Haas, tapped FreshAir Sensor as a solution to these challenges. FreshAir’s immediate detection and smoking alerts have resulted in enhanced no-smokingenforcement processes, reduced smoking violations, and streamlined smoking fee collection.
Adaptive Airflow Application for Cleanrooms
Aircuity (www.aircuity.com), the global leader in creating healthy and sustainable buildings announced the launch of its cleanroom application that delivers adaptive airflow for cleanrooms allowing for carbon reduction, energy savings and precisely controlled IAQ. Aircuity’s cleanroom application delivers precise multi-parameter IAQ measurement to enable adaptive airflow in cleanrooms of ISO 7 and 8. The platform dynamically adjusts air change rates based on continuously monitored particle levels. Airflow is optimized when particle levels are low and increased as levels rise to ensure compliance with ISO standards. Cleanrooms are the most energy intensive spaces per square foot in the built environment.
Three-screw rotary pump technology for transformer ester and mineral oil purification service
The IMO 3-screw design excels under low/vacuum inlet pressures and provides enhanced reliability and longevity. The pumps are available in the 3D and 3E series for transfer/circulation of transformer insulating oil. Series 3D pumps, available in 19 different displacements, incorporate full hydraulic balance that cancels axial and radial thrust loads due to discharge pressure. The pump shaft is generously sized to allow belt drive if desired for mechanical seal versions.
TECHNOFORCE e-MTV Packaged Booster System
Designed with premium functionality, similar to the TECHNOFORCE e-MTX, Bell & Gossett's newest TECHNOFORCE e-MTV Packaged System offers standout efficiency from installation to operation, all while delivering overall lower costs. Built to maintain a constant clean water delivery pressure, the e-MTV is a prefabricated solution that arrives ready to install for easy integration, saving time and labor. A variety of fixed-SKU options all feature e-SV stainless steel vertical multistage pumps, one of the highest efficiency multistage pumps on the market today, while the 7-inch color touchscreen interface provides an intuitive and simplified user interface for ease of commissioning and troubleshooting. “Advancing solutions that meet our customers’ growing demand for shorter lead times and ready-to-use options reflects our commitment to strengthening the user experience and simplifying operations,” said James Wilkinson, Americas product manager, packaged systems, Xylem.
High-Performance Thermoplastic Composite Aerospace Brackets
Lightweight durable parts are an excellent replacement for metal materials Lansdale, PA – Greene Tweed, a leading global manufacturer of high-performance sealing solutions and engineered components, highlights the availability of Xycomp DLF high-performance thermoplastic composite aerospace brackets, which can endure the substantial demands of aerospace environments while offering significant weight savings over metallic parts. Greene Tweed aerospace production components have been flying since 2011 and at 35 to 60 percent lighter than competitive metallic components, the brackets are an excellent replacement for metal materials. Greene Tweed’s proprietary compression molding system provides high performance solutions with increased part complexity. The aerospace brackets, which are used to join structural elements together, provide support, and hold essential components firmly in place, can now be produced in complex-contour shapes for near-net, intricate geometry with molded-in features such as bushings or attachment points. The material meets fire, smoke, and toxicity (FST) safety requirements for interior aerospace parts, and offers excellent resistance to aerospace solvents, high temperatures, and high vibrations for extended component life.
Energy storage systems for power system design
Cat Energy Storage Systems (ESS) are commercially available battery technologies that help enhance power reliability and quality, improve flexibility in power system design, support the integration of renewable energy sources and potentially reduce overall energy costs Now available for purchase and rental from Cat dealers in select regions worldwide, Cat ESS offerings include Cat power grid stabilization (PGS) and Cat energy time shift (ETS) modules with optional energy capacity expansion (ECE) modules. The systems feature flexible, scalable and modular designs for a wide range of electric power distributed energy system applications, offering capabilities including generator set transient assist, grid integration and support, shifting of energy from time of generation to time of use, power stabilization, power factor correction and renewable energy integration.
Pico line-powered wireless control
Lutron Electronics, the global leader in wireless lighting control solutions, introduces the Pico line-powered wireless control for commercial projects that require a battery-free option. The new line-powered device is connected to line-voltage power and communicates wirelessly via RF to Vive wireless load-control devices including dimmers, switches, fixture controllers, and receptacle controllers. .
BAER Belt Drive Sidewall Propeller Fan Line
Greenheck has expanded its BAER belt drive sidewall propeller fan line to include supply airflow configurations and expanded sizes. Model BAER is now available in supply and exhaust configurations with propeller diameters from 24- to 48-in. and performance capabilities from 300 to 54,000 cfm or up to 3.3 in.
FLIR ONE Edge visible camera system
The FLIR ONE Edge is a wireless dual thermal and visible camera system for mobile devices. Purpose-built for applications across remediation, automotive, electrical, HVAC and plumbing, the new model offers the same detachable form factor as the FLIR ONE Edge Pro with Bluetooth and wireless connectivity, but with features tailored to the needs of consumers, small businesses and enterprise volume purchases. DIYers to professional tradespersons to enterprises now have a future-proofed option that works with both iOS and Android mobile devices, along with guided inspection apps and free cloud storage, to make thermal inspection more effective and convenient. The FLIR ONE Edge connects to a smart device through the FLIR ONE app available on Google Play and the Apple App Store, allowing users to identify thermal hot or cold spots that could indicate faults and developing issues. Similar to the FLIR ONE Edge Pro, FLIR ONE Edge provides superior context and clarity for everyday decision support through Multi-Spectral Dynamic Imaging, a patented image enhancement feature that overlays visible edge detail on the thermal image without sacrificing any thermal details. To support thermographers both new and experienced, the FLIR ONE Edge is compatible with a rich set of software tools from Teledyne FLIR.
Hornet destratification fan
Hornet is an industrial-focused, destratification fan specifically designed to deliver increased energy efficiency, better building performance, improved storage resiliency, and superior comfort, productivity, and safety to your most demanding applications. A powerful, versatile, durable, and proven destratification fan, Hornet offers a simple solution to a complex problem -- mixing warm air from the ceiling to the floor to provide a more even temperature distribution throughout your facility. Ideal for congested areas and heavily obstructed environments, like racking aisles and areas with utility drops, Hornet can work alone or be paired with HVLS fans to provide a whole-building destratification solution in facilities. Fan Features: IP55, ultra-quiet, 1/3 HP motor and 2 aluminum blades Heavy-gauge steel frame and lower guard secures and protects motor and blades Vibration-dampening housing made from durable high-density polyethylene Variable speed settings that deliver up to 5,749 CFM Hornet "Speed" Controller and BAFCon/BACNet only enabled with the automation & multi-fan kit BAFCon control is NOT included and needs to be purchased separately Industry-leading 5-year warranty and best-in-class safety features Allows operation at elevated speeds, providing a cooling effect when desired in warmer months.
VELTRON III Pressure and Flow Transmitter
The VELTRON III Pressure & Airflow Transmitter is a pivotal addition to the HVAC industry. Designed for cutting-edge building airflow distribution systems, fan inlet airflow measurement, and room pressurization, the VELTRON III is set to redefine the standards of reliability and accuracy in airflow measurement. The VELTRON III is a multifunctional, dual-channel transmitter specifically engineered for HVAC airflow measurement applications.
AI-powered HVAC system
KOVA Comfort Intelligent HVAC is an innovative, AI-powered HVAC system that seamlessly integrates into building projects creating healthier, more comfortable environments based on a variety of inputs, including users’ daily routines. Pushing beyond the current industry offerings of IoT and “smart” systems, KOVA Comfort leverages behavioral, environmental and unit-specific occupancy inputs to learn, personalize and optimize comfort and energy usage in each unique living environment. With a minimal footprint, sleek design and elegant profile, the compact system is a cutting-edge solution for multifamily, student housing, hospitality and residential properties.
PowerLine 200 Gen 2 Driverless Tape Light
The PowerLine 200 Gen 2 is the next generation of the direct-connect PowerLine 200 driverless tape light. Offering ETL Listed custom lengths in 12-inch increments for continuous runs up to 164 feet, the tape light provides the same high-quality performance, reliability and compatibility provided by the popular PowerLine family. The PowerLine 200 Gen 2 is available for both 120-volt driverless hard-wire and plug-in installations and features one of the broadest selections of configuration options on the market.
EH oil regeneration fine filter element
The EH oil regeneration fine filter element DR913EA03V/-W is a primary filter element in the turbine EH oil regeneration system. Its main function is to filter impurities and particulate matter in the fuel oil to avoid affecting the regeneration device. Why use this precision filter cartridge as a primary filtration device? The main reasons are as follows: High filtration accuracy: The regeneration unit requires a high level of purity for EH oil, and requires removal of fine particles and contaminants.
Fan filter diffuser line
Greenheck fan filter diffusers are unidirectional diffusers with integrated EC motors and high-efficiency filters that provide ultra-clean air necessary in critical applications or retrofit applications where additional power is needed to overcome filter pressure drop. Ceiling-mounted, inline and portable models are available. Model HLC-FPS is a self-contained fan filter supply diffuser with industry-leading airflow rates up to 1200 cfm to meet USP 797 and 800 air change requirements. The HLC-FPS connects directly to system ductwork and is simple to install in a ceiling grid or hard ceiling. Model HLC-FPR is a ceiling or wall-mounted fan filter return diffuser that creates a negative pressure environment drawing air up and out of a room, removing airborne contaminants via the unit’s gel-seal high-efficiency filter and discharging clean air. Model HLC-FPI is a ducted inline fan filter unit designed to continuously filter the air passing through the unit and remove a wide range of airborne contaminants, making it ideal for schools, office buildings and other commercial indoor environments. Model HLC-FPC is a fan filter mobile cart available in both recirculation and return/exhaust configurations that can act as an in-room air purification device. Greenheck fan filter diffusers provide quiet, energy-efficient operation and can be specified with HEPA or ULPA filters or supplementary MERV-rated pre-filters depending upon the application.
Anodized Aluminum for Architectural Applications
Lorin Industries, Inc., the global industry leader in the innovation and production of coil anodized aluminum, highlights its anodized aluminum for architectural applications. Lorin’s coil anodizing process builds an anodic layer from the aluminum, bonding it to the surface at the molecular level, thus protecting the aluminum from the elements. The anodized aluminum will not chip, flake, peel, or corrode and also resists scratching. With a Mohs Hardness score comparable to sapphire, and corrosion resistance that leaves the metal unaffected by salt and air, coil anodized aluminum provides durable beauty that cuts maintenance costs while providing added environmental benefits.
Sustainable heat-rejection condensers for refrigeration
Baltimore Aircoil Company, Inc. (BAC) highlights its leading innovative and sustainable products for refrigeration. BAC’s sustainable heat-rejection products for refrigeration include the CXVT Evaporative Condenser XE models, the Vertex Evaporative Condenser, and the TrilliumSeries Adiabatic Condenser.
i-Vu Express building automation device
Carrier has released its latest i-Vu Express building automation device. The new connected device comes pre-installed with i-Vu Express v8.5 software and can receive automatic software updates. The i-Vu Express building automation system provides a 360 degree view of a building’s entire operation allowing operators to maintain comfort for occupants, optimize energy usage and resolve problems faster.
Starline Series S Track Busway
Legrand, the global specialist in electrical and digital building infrastructures, is proud to unveil the next generation Starline Series-S Track Busway power distribution system. This revolutionary product combines the performance, functionality and flexibility of Starline's proven track busway technology with the added benefit of an IP54 ingress-protection rating. As a result, Legrand is meeting the growing commercial and industrial demand for splashproof, highly dust-resistant and extremely flexible electrical power distribution systems.
9PX 6 kVA lithium-ion uninterrupted power supply
The 9PX 6 kVA lithium-ion UPS incorporates innovative capabilities, including lithium-ion batteries, remote firmware upgrades and seamless integration with leading HCI and virtualization platforms. This makes it ideal for edge computing environments as well as light industrial, K-12, higher education and healthcare IT applications. Its longer battery life allows for a "set-it-and-forget-it" approach that requires little on-site support form IT staff, data center professionals or maintenance personnel.
Veritus Air Source Heat Pump Water Heater
Lochinvar’s Veritus Air Source Heat Pump Water Heater (HPWH) maximizes energy savings due to its high coefficient of performance (COP). The unit utilizes a low Global Warming Potential refrigerant (R513A) to help facility managers meet sustainability goals and adhere to local regulations. The unit’s modular design allows for flexible installation options, and its user-friendly Smart Touch control panel makes it simple to adjust settings and monitor performance.
Pressurizing Pump
Armstrong Fluid Technology has unveiled a new high performance Pressurizing Pump for the Latin American residential market that is designed to increase hydraulic pressure in homes that have dishwashers, high-flow showerheads, water heaters and other high-demand equipment. Featuring low power consumption and a flow sensor that allows automatic activation, the new Armstrong Pressurizing Pump can supply a home with 1 to 5 bathrooms. It can be installed at the outlet of a water tank or before any supply or derivation to service. Adaptable to both cold and hot water up to 90°C, the new pump is ideal for instantaneous heaters. It can also be used for ventilation, heating and air conditioning circulation. The pump activates automatically when a tap is opened and turns off when the tap is closed.
Fiber-coupled LED source
LumeDEL LLC introduces the NewDEL™ Fiber-coupled LED sources that are designed to generate high radiant power with spectrally stable output. They combine high performance with ease-of-use. NewDEL™ LED sources can be highly effective replacements for lasers and lamps for many scientific and industrial applications such as spectroscopy, optogenetics, photodynamic therapy, fluorescence excitation and photocatalysis. LumeDEL’s NewDEL™ fiber-coupled LEDs include 17 narrowband models with peak wavelengths from the UV to the near-IR spectral regions, as well as two white light LEDs and a continuum source.
Cogeneration systems for combined heat and power applications
Russelectric, a Siemens Business, is a manufacturer of automatic transfer switches and power control systems, who manufactures UL-listed cogeneration systems for combined heat and power (CHP) applications in which the generator sets are run to serve the connected load and heat is also recovered for other uses. Designed and built for mission critical facilities such as healthcare, research and development and campus facilities, Russelectric cogeneration systems are designed to provide maximum protection for operators and maintenance personnel and to minimize the danger of operator error. All Russelectric cogeneration systems are UL listed, offer programmable logic controller (PLC) system controls, and are supervisory control and data acquisition (SCADA)-capable. They feature utility/generator and other power assets paralleling control, and provide active synchronization and soft loading. Systems use a utility-approved interconnecting protective relay system. Russelectric cogeneration power control switchgear may have additional controls and monitoring to optimize heat recovery.
G57 premium elastomer
Chemraz® G57 is a perfluoroelastomer that Greene Tweed material scientists and application engineers specifically developed to meet the demands of aggressive dry plasma systems and other extremely demanding semiconductor fabrication sealing applications. Chemraz® G57 perfluoroelastomer’s unique formulation provides enhanced plasma resistance and minimal contamination, resulting in less downtime and higher wafer processing yields. Recommended primarily for both static and dynamic oxide etch wafer processing applications, Chemraz® G57 remains stable at service temperatures up to 572°F. Boasting nearly universal chemical compatibility, and the broadest chemical resistance of any elastomeric material, Chemraz® G57 is idea for use across a wide range of sealing applications, including endpoint windows, bell jar seals, valve seals, KF fitting seals, window seals, isolator valve seals, lid seals, gas inlet seals, slit valve seals and chamber seals. Greene Tweed delivers highly customizable solutions guaranteed to provide excellent performance under extremely challenging operating conditions in the semiconductor industry. Its portfolio of advanced elastomer seals and thermoplastic components are found throughout a broad range of mission-critical equipment in key process areas of the world’s semiconductor fabs, including etch, deposition, aqueous and electro-chemical (electroplating).
B20 biofuel boiler
Paving the way for a more climate conscious future, hydronic comfort heating solutions leader Weil-McLain® has announced that its Ultra Oil, WGO, WTGO and SGO residential oil boilers are now certified for use with biofuel blends up to 20% (B20). Using B20 with a certified oil boiler can help reduce greenhouse gas emissions because biodiesel is a cleaner-burning fuel than petroleum diesel and can provide similar performance while significantly limiting how much carbon dioxide is released into the air. Other benefits of using a B20 certified boiler include: Renewable energy source: Biodiesel is made from renewable sources, meaning it can be continually produced by a steady supply of raw materials. By utilizing biodiesel in a B20 blend, the dependence on finite fossil fuel resources can be reduced. Energy security: Incorporating biodiesel into a fuel mix diversifies energy sources and reduces dependence on foreign oils and petroleum.
XG-TH-500 Series Air Terminal Units
Greenheck’s XG-TH-500 Series Air Terminal Units (ATU) are zone-level air distribution devices that regulate airflow for maximum occupant comfort in variable or constant volume applications. The single-duct XG-TH-500 features a galvanized steel casing mechanically sealed for low leakage construction along with a round inlet damper, an inlet flow sensor, and a rectangular outlet. Cooling only, hot water coil, and electric heat configurations can be specified.
FreshAir smart sensors for mold detection
Monitoring enables corrective action before mold growth affects living conditions For conditions in military barracks and housing FreshAir, an industry leader in the development of sensors to detect and alert for hazardous chemicals, announces new Smart Sensors that can track conditions that allow mold to grow, as well as monitor for and detect tobacco and marijuana smoking. The system provides real time alerts to building and operations managers, enabling corrective action before mold growth, significantly improving living conditions in military barracks and housing. Using FreshAir’s devices will result in cleaner and safer military barracks and housing, as well as reduce long-term smoking-related medical costs. FreshAir’s Wi-Fi devices provide real-time monitoring and send alerts of mold conditions and smoking incidents to clients with scientific proof, including detailed, time-stamped charts.
Compressor platforms optimized for use with A2L refrigerants
Copeland, a global provider of sustainable climate solutions announced it is optimizing its major Copeland air conditioning (AC) and refrigeration compressor platforms for reliable use with A2L refrigerants while improving performance. “As a global technology leader in heating, air conditioning, and refrigeration, Copeland has been helping customers achieve their sustainability, decarbonization and regulatory compliance goals,” said John Schneider, president, HVACR Americas at Copeland. “This next generation of safe, reliable and highly efficient A2L compressor technologies is designed to help industry stakeholders transition to lower global warming potential (GWP) refrigerants and meet sustainability goals and environmental regulations in a timely and competitive manner.” To prepare for the imminent approval and wider adoption of A2L refrigerants, Copeland’s portfolio of next generation A2L-optimized compression technologies includes the following recently listed refrigerants: R-32 (675 GWP) and R-454B (466 GWP) for air conditioning applications; and R-455A (146 GWP), R-454C (148 GWP) and R-454A (238 GWP) for refrigeration applications.
IronHorse stainless steel worm gearboxes
AutomationDirect now offers IronHorse stainless steel worm gearboxes. Worm gearboxes are power transmission devices that drive a load at a fixed reduced ratio of a motor’s speed. The stainless steel housings of these gearboxes make them suitable for the food and beverage industry and many other harsh industrial applications. IronHorse stainless steel worm gearboxes are IP69K rated and BISSC certified (Baking Industry Sanitation Standards Committee) with the housing, covers, and flanges all made out of 304 stainless steel.
850-W MPR0812 Power Supplies
To help address the challenges of more power in less space, ABB Power Conversion has expanded its MPR-series rectifier family with two new 850-watt MPR0812 power supplies. The MPR0812TEX12Z01A is designed for forward air flow for cooling and the MPR0812TER12Z02A utilizes reverse air flow. The compact, 1.57” high by 9” long by 2.5” wide rectifiers meet Class B radiated and conducted emissions requirements. This combination makes them well suited for a broad range of applications including computing and networking applications and communication systems, where space is often limited.
KSQ Mixed Flow Untempered Roof Supply Fan
Greenheck’s new KSQ mixed flow roof supply fan provides energy-efficient building supply or untempered make-up air in applications where heating and cooling are not required. Model KSQ is available in direct drive sizes 7 through 33 with performance up to 16,750 cfm and 2.75 in. wg in multiple configurations including horizontal or bottom intake and horizontal or bottom discharge.
Revit Version 24.0
Schneider Electric’s launch of its Advanced Electrical Design™ for Autodesk® Revit® (v24.0.0) offers more intelligent, unified and connected workflows. Designed by BIM Electrical Corp., an organization formed by Schneider Electric and Autodesk to drive long-term digital transformation in the industry, the enhanced software helps electrical engineers improve workflows while increasing efficiency and accuracy. Built by engineers for engineers, the software provides an all-in-one solution to plan, analyze, optimize and document electrical plans, saving significant time in building electrical networks designed for the future energy landscape.
Colored Anodized Aluminum
Muskegon, MI- Lorin Industries, Inc., the global industry leader in the innovation and production of coil anodized aluminum, highlights the wide variety of colors available for its anodized aluminum. The beauty of anodized aluminum extends beyond the natural beauty of the aluminum alloy itself. Thus you can move beyond expectations with gorgeous colors of not only the metal of your choice, but also any particular color in the rainbow that you may like. Color anodizing by Lorin can be done for a variety of applications including interior and exterior architectural, consumer goods, and transportation applications. Lorin offers a wide variety of UV stable colors that can mirror or match natural metal looks, including stainless steel, brass, gold, zinc, pewter, bronze, copper, and natural aluminum.
USF Centrifugal Utility Sets
Greenheck has redesigned model USF single-width centrifugal utility sets in sizes 4 to 24 to incorporate more features and options. The USF now offers expanded direct drive selections with Vari-Green motors up to 10 hp. Factory-mounted or ship-loose controls with VFDs are now available with belt or direct drive motor configurations up to 30 hp.
Anodized Aluminum for Ceiling Applications
Muskegon, MI- Lorin Industries, Inc., the global industry leader in the innovation and production of coil anodized aluminum, highlights its anodized aluminum for ceiling applications. Lorin’s ClearMatt® and Metal finishes are ideal for interior and exterior ceiling tiles. Lorin’s coil anodizing process builds an anodic layer from the aluminum, bonding it to the surface at the molecular level, thus protecting the aluminum from the elements, even when the ceiling panels are used for the exterior. The anodized aluminum will not chip, flake, peel, or corrode and also resists scratching.
Next Generation Cellular Module (NXCM)
Honeywell's Next Generation Cellular Module (NXCM) enables Advanced Metering Infrastructure (AMI), and is a groundbreaking solution that upgrades legacy gas and water meters into smart meters without requiring expenditure on additional infrastructure. This innovative module allows meters to be wirelessly connected through existing public cellular networks, enhancing monitoring, safety, and analytics capabilities for utility providers and their customers. The NXCM helps utility providers gather data from gas and water meters, improving operational efficiency, reducing costs, and providing customers with accurate usage information. By retrofitting existing meters with the NXCM, utility providers can leverage the benefits of smart meter technology without the need for significant custom infrastructure investments that would require additional installation and maintenance costs. The NXCM is a flexible and scalable solution for utility providers of all sizes, with secure data transmission using advanced authentication methods and AES-128 encryption that ensures utilities comply with metering and data management regulatory requirements.
BTDR-50 Bowtie Damper
Greenheck's BTDR-50 is a cable-operated radial blade balancing damper, also known as a bowtie damper, that is designed for easy airflow adjustment at an air outlet or plenum neck. The BTDR-50 is available in steel in 6-, 8-, 10-, 12- and 15-in. diameters, with pressure capacity up to 1 in.
Wenglor TPL Vision Lighting
Wenglor TPL Vision Lighting from AutomationDirect AutomationDirect has added new Wenglor TPL series vision lighting components to their Barcode/RFID/Vision products. Vision lighting provides the proper amount of contrast, brightness, and uniformity to an imaging surface so a good image of the code or object can be achieved. Built using high-quality LEDs, these Wenglor lighting components offer several light color options including white, red, and infrared. Bar lights, ring lights, flat lights, flat dome lights, and a variety of accessories are now available. Bar lights consist of a linear package (bar) with a row of LEDs and are available in lengths from 125mm to 500mm. Ring lights are LEDs contained in a circular package and are sold in 80mm and 130mm diameters (approximate internal light diameter).
Intelligent Notification Controller
Eaton’s Intelligent Notification Controller (INC) is a smart, modular panel that provides power to notification appliances with multiple means of supervision, superior diagnostics, and redundancy to improve the resiliency of fire alarm systems. The INC features a unique addressable notification circuit technology with its Sub-NAC modules. These devices provide the ability to current limit or open branch circuits containing a short, thereby, protecting the rest of the system.
LED Nightlight with Duplex Receptacle
Eaton's Wiring Devices LED Nightlight with Duplex Receptacle (TR7734) features an industry first, color temperature changing technology (Cool, Neutral and Warm) and four brightness levels. Designed with two modes of operation, an industry exclusive, in Nightlight mode, the integrated photosensor turns the nightlight ON/OFF based on the ambient light in the space. The Guidelight mode allows users to override the photosensor for continuous nightlight operation.
Prime Power Systems
Russelectric, A Siemens Business, a leading manufacturer of power control systems and automatic transfer switches, offers its Prime Power Systems, which are used for automatic operation of on-site power generators to serve a facility’s entire load. The Prime Power Systems are used as the primary source of power to a facility. Generator paralleling controls provide active synchronization and soft loading control of the engine generators based on load demand. All Russelectric Prime Power systems are UL listed, offer programmable logic controller (PLC) system controls, and are supervisory control and data acquisition (SCADA)-capable. In prime power applications, engine generators are run in response to the connected load.
OSQ C Series
The OSQ Series C family of outdoor lighting solutions redefines what’s possible in area and flood lighting by elevating efficacy while providing precise control and visual comfort. NanoComfort Technology gathers new, ground-breaking optical engineering into a 4x4 modular, individually faceted LED system with softer, more diffused light that reduces glare and spillover, all without the loss of light control or target coverage. Highly durable glass and acrylic lens system dramatically reduces potential points of failure versus sealing each LED at the optic.
Model MOA Modular Open Array
Greenheck’s new Modular Open Array, model MOA, provides a turnkey retrofit package that delivers certified performance, communication, and controllability. The MOA configurable fan array features lightweight, easy-to-assemble components that ship to the job site knocked down for field installation. UL power and controls packages are available and array panels arrive prewired for quick and easy installation saving time at the jobsite.
MCI-2005
How do MCI-2005, concrete durability, and sustainability fit together? The longer a concrete structure lasts, the better, because it reduces the need to make replacement concrete, which is an energy intensive resource. Since cement, a main component of concrete, is blamed for as much as 8% of global CO2 emissions, this reduction could have significant implications for sustainability. This may be one reason it is becoming more and more common to hear about structures being built with a service design life of 100 years or more.
XT Compact Combination Starter
Cost-effective design consisting of UL Type F combination motor controller, control power transformer (CPT), terminal block, Hand/Off/Auto selector switch, rotary style disconnect and red RUN pilot light. Motor controller consists of an XT contactor, manual motor protector (MMP) and adjustable Class 10 thermal overload. 65 kAIC SCCR up to 480 V & BACnet MS/TP as a factory- or field-installable option.
VFD 900 Series Check Valve AKA “The Jellyfish”
Metraflex has once again reengineered a traditional and long ignored hydronic component to improve efficiency and lower operating costs. The new VFD Check Valve improves the Cv 38% for a 4” check valve operating at 6 FPS. The increase in flow is due to reshaping the disk, just by examining the new disk design it is obvious why this product is more Hydrodynamic. In addition to the increase in Cv, the new Hydrodynamic disk is specifically designed to provide superior functionality in low flow conditions common with VFD drives. The VFD Check Valve is the latest in product innovation from Metraflex and follows up the revolutionary LPD Y-Strainer.
Single Phase Isolation Transformer 300 VA – 60 kVA
ATO single phase isolation transformer is a type of transformer that provides electrical isolation between the primary and secondary windings. It is commonly used in applications where there is a need for electrical isolation and/or where the voltage needs to be stepped up or down. The optional primary voltages and secondary voltages are 110V/120V/208V/220V/230V/240V.
DDF Directional Destratification Fan
Greenheck’s extensive product line continues to grow with the addition of model DDF, a directional destratification fan that improves comfort and reduces energy costs by efficiently mixing air from floor to ceiling for uniform temperature distribution. The high-performance direct drive model DDF is available in three sizes and performance levels: a 10-inch diameter for ceilings up to 25 feet, a 12-inch diameter for ceilings up to 45 feet, and a 14-inch diameter for ceilings up to 60 feet. Model DDF features an aerodynamically optimized housing for maximum airflow, throw distance, and coverage area and includes Greenheck’s Vari-Green electronically commutated (EC) motor and controls technology for maximum efficiency and controllability.
High-Efficiency Gasketed Plate and Frame Heat Exchangers
MORTON GROVE, ILL. – March 20, 2023 – As part of Bell & Gossett’s Building Better platform and commitment to sustainability, the addition of advanced, high-efficiency “X” plates enhance Bell & Gossett’s new gasketed plate and frame heat exchanger GPX P45, P55, P86 and P110. Engineered for efficiency, “X” plate technology increases heat transfer thermal performance up to 20%, reduces surface area up to 20% and reduces materials up to 15%.
SwitchFire Condensing Boiler
Cleaver-Brooks announces the launch of its new SwitchFire condensing boiler, developed for applications requiring dual-fuel capabilities such as healthcare facilities and other critical operations. The boiler utilizes a state-of-the-art burner that operates with low excess air levels, increasing boiler efficiency and condensing performance. In addition, its dual-return design improves boiler operating efficiency compared to a traditional single-return system.
X Series 2-inch Modular Downlights
The collection of modular 2-inch downlights feature field-changeable trims, modules and optics for exceptional versatility. The product family provides the ultimate in performance, installation, serviceability and finishes. A breakthrough for error-free installation, the downlights are shipped with a patent-pending collar eliminating over-cutting and drywall repair, common with small-aperture fixtures.
X Series 3-inch Modular Cylinders
The X Series collection of modular 3-inch Cylinders include pendant, surface-mount and wall-mount solutions with field-changeable trims, decorative diffusers, snoot, and optics, providing an unmatched level of flexibility and customization with a choice of over a million configurations. The series included an ADA compliant wall sconce, as well as an uplight option for direct and indirect illumination. The X Series Cylinders are offered in 6- and 9-inch lengths with lumen outputs from 750 to 1250 lumens. Pendants cord and stem lengths can be adjusted on site for maximum flexibility.
EcoStruxure Building Operation 2023
BOSTON, MA, March 9, 2023 – Schneider Electric, the leader in the digital transformation of energy management and automation, today announced its enhanced solutions to increase building sustainability. Included are new integration capabilities in EcoStruxure Building Operation 2023, EcoStruxure Connected Room Solutions, and EcoStruxure Power Monitoring Expert, which will help simplify and speed-up access to data that is essential to manage energy use, help reduce carbon emissions, and enhance building value. Responding to the global imperative to reduce energy use and carbon emissions Open and flexible EcoStruxure Building solutions help owners and facility managers respond to rising energy costs, as well as mandates for net-zero carbon emissions by 2050. New functionality enables seamless integration to deliver actionable insights and control of multiple building, power, electric vehicle charging, and renewable energy systems in a single, convenient, mobile-enabled control center.
Gridpak portable renewable energy solution
Trystar, a leader in electrical testing, control, and conveyance products, is introducing a carbon-neutral, solar-based, portable renewable energy solution to help utilities and rental house customers respond to demands for more carbon-friendly power sources. The GridPak is a carbon-neutral alternative to conventional diesel and gas power sources. It provides up to 30kW of power and features battery capacities of 60kWh and 120kWh, with an option for 180kWh.
NOTIFIER INSPIRE fire alarm system with Self-Test detectors
Honeywell, a global leader in fire and life safety, today launched the first fire alarm system with UL-approved self-testing smoke detectors that can be tested automatically, changing the way fire and life safety systems are installed, tested and maintained. The NOTIFIER INSPIRE fire alarm system with Self-Test detectors is designed to help create a safer building environment by increasing facility managers awareness of system needs while equipping service providers with digital self-testing tools that streamline maintenance and support regulatory compliance and system uptime.
LED recessed linear system for modern architecture integration
The Pivotaire Nano Linear Recessed Mud-in Linear System is offered in five configurations (straight, wrap, picture frame, zig zag and custom). The high-performing, unique LED recessed linear system provides clean, modern lines of high-impact linear light to seamlessly integrates into today’s modern architecture. With the ability to rotate 360 degrees, the patented mounting system allows designers the flexibility to integrate the product at any angle, including horizontal and vertical. A unique, patented lens design allows even, uniform illumination across the entire surface from one edge to the other — no dark edges — compared to other products on the market. The linear system, which is built to a designer’s exact specifications in 1-foot and 1-inch custom lengths, is available in 1-inch and 0.5-inch widths and in multiple lumen packages from 100+ lumens per foot to 700+ lumens per foot and seven color temperatures of 2200K, 2400K, 2700K, 3000K, 3500K, 4000K and 5000K CCT with a CRI of 95+.
End-suction pump
The Grundfos NBSE split-coupled, end-suction pump with a permanent magnet motor, integrated variable speed drive, and onboard controls, serves as the industry standard in performance, quality, and durability. It is designed for many applications such as HVAC, industrial applications and more. It has NEMA standard motors and ANSI flange fittings.
Exterior Aluminum Panels
Advanced Automation Speeds Installation of Exterior Aluminum Panels INDIANAPOLIS, Ind. – Estes Design and Manufacturing, a full-service sheet metal fabricator, uses advanced automation and a collaborative approach to produce exterior aluminum architectural panels that are easier and faster to install. A recent project completed included the 30,000-square-foot Fishers, Ind., Fire Station. 1,003 pre-painted, .050 aluminum architectural and soffit panels were fabricated using a fully-automated fabrication cell – with zero remakes. Interlocking features of the architectural panels were designed in partnership with The Hitzfield Group of Noblesville, Ind., which designs and installs building envelopes and structural façade components nationally.
Wireless Processor
Lutron introduces the Athena wireless processor to its Athena lighting control system. The new processor is right sized for smaller spaces and yet easily scalable for use in larger projects. With the innovative Athena wireless processor, Athena systems do not require panels, and work with a wide range of both wireless and wired devices, saving coveted electrical closet space and giving designers, architects, and engineers greater flexibility. Design professionals have come to expect increased versatility from the building systems they use.
AMPLIFY DM-3 Overhead Fan
The AMPLIFY DM-3 is a small-diameter architectural overhead fan that boosts occupant comfort while enhancing the interior design of commercial and institutional building spaces. Featuring curved polymer airfoils designed to maximize airflow, improve efficiency, and optimize coverage area, the DM-3 is available in a 5-foot diameter with airflow up to 7,113 cfm and cooling effect up to 7oF/4oC. The DM-3’s lightweight, direct drive motor is up to 20% more efficient and 10 dBA quieter than traditional motors.
Kagami Controller
Fujitsu General America intorduces the Kagami Controller, offering modern, touchscreen control of Airstage H, J and V-Series systems. The nearly five-inch-square controller’s display is a half-mirrored, anti-fingerprint LCD. The Kagami Controller switches intuitively between Custom Auto, Cool, Dry, Fan and Heat modes. A multi-color LED indicates the current operating mode of the indoor unit. Scrolling through setting options simply requires a left or right swipe. A weekly operation schedule can be set, and a human sensor setting is available on select models. Select sensor values, including the connected heat pump’s EEV pulse value, can be monitored from within the new controller, and room temperature offset can also be modified. Both individual and group control is available. Up to 16 individual indoor units can be simultaneously controlled from a single unit. Initial setup and adjustments are accomplished via Bluetooth connection with Fujitsu’s Remo Set smartphone app. Settings can also be read from one controller and copied to another in the same manner. The controller can retain and display HVAC contractor contact information, and a logo feature allows hotels to display their corporate logo on the touch screen when not actively in use. Settings can also be masked for hotel installations.
Easyzone
Easyzone is well established in the European marketplace as an easy-to-install and energy-efficient zoning solution. It ships as a pre-wired kit, including the thermally insulated motorized plenum, control board and plenum neck. The plenum neck provides custom mechanical adaptation for each model of HVAC unit, so installation is truly plug-and-play.
YORK YMAE Air-Cooled Inverter Scroll Modular Heat Pump
The YORK YMAE Air-Cooled Inverter Scroll Modular Heat Pump is based on the award-winning Amichi platform and features electronic vapor injection (EVI) scroll compressors. An evolutionary development of the 2021 ACR Awards Heat Pump Product of the Year, the YORK YMAE Air-to-Water Inverter Scroll Modular Heat Pump produces 140°F (60°C) hot water at the highest COP in the category. It also delivers the broadest operating envelope in the market, allowing maximum flexibility across the widest range of applications.
YORK® CYK Water-to-Water Compound Centrifugal Heat Pump
The next-generation YORK® CYK Water-to-Water Compound Centrifugal Heat Pump will soon add a 400-ton model that will deliver space heating electrification to a wider range of commercial buildings.
YORK YVWH water-to-water dual variable-speed screw heat pump
The YORK YVWH water-to-water dual variable-speed screw heat pump delivers water temperatures up to 176 F, the highest for any screw heat pump in the market.
Stainless Vertical Firetube (SVF) Family of Commercial Boilers
Weil-McLain has added five sizes to its advanced, energy efficient Stainless Vertical Firetube (SVF) boiler portfolio for commercial heating applications. The new boiler line has expanded to now include BTU sizes of 500, 600, 725, 850 and 1000 MBH models that join the existing 1500, 2000, 2500 and 3000 BTU configurations. Featuring industry-leading thermal efficiency up to 98%, unrivaled ease of installation and maintenance and color touchscreen Unity 2 and Nuro control systems, the SVF meets all market-driven bid specifications for new construction projects.
Optimizer suite for building management
Honeywell showcased its latest products and services for the HVAC industry at the 2023 International Air Conditioning, Heating and Refrigerating Exposition (AHR Expo), on February 6-8, in Atlanta. Honeywell Optimizer Suite, a robust building management system solution that provides greater cybersecurity protection and is easy to install and maintain. New SaaS offerings from Honeywell include Remote Building Manager, a cloud-based supervisor platform.
Healthcare, Laboratory and Cleanroom Air Distribution Products
Greenheck’s new line of healthcare, laboratory, and cleanroom (HLC) air distribution products are designed, engineered, and tested to meet or exceed today’s critical environment standards for performance and energy efficiency. This product line includes Laminar Flow Diffusers, Radial Flow Diffusers, and Surgical Air Curtains. Laminar flow diffusers are engineered to provide a vertical projection of low-velocity supply air, introducing clean supply air without the entrainment of airborne particulate in the space due to its low velocity. These diffusers play a critical role in maintaining an aseptic environment below the diffusers in operating rooms, patient isolation rooms, pharmacies, and cleanrooms. Radial flow diffusers provide an effective method of air distribution in laboratory and patient isolation room applications where a high volume of air is required.
WEG CFW500 High-Performance and Washdown Duty AC Drives
More WEG CFW500 High-Performance and Washdown Duty AC Drives from AutomationDirect. AutomationDirect has extended its line of WEG CFW500 high-performance AC drives to include more horsepower options. With this addition, the high-performance horsepower ratings have been expanded all the way up to 150hp. Also added are new higher current high-performance 10hp drives as well as 10hp washdown rated IP66/NEMA 4X models. A full range of supporting accessories is also included with this launch. The new WEG CFW500 drives start at $826.00. All WEG CFW500 VFDs and accessories come with a one-year warranty. Learn more by visiting: https://www.automationdirect.com/ac-drives.
NTB7L Power Tubing Bender
NAVAC, the world’s largest supplier of HVAC vacuum pumps in addition to a wide array of tools, gauges, charging machines, recovery units and industry-specific items, has introduced the HVAC/R industry’s first power tubing bender. The newest addition to the company’s BreakFree series of conveniently cordless tools, NAVAC’s NTB7L Power Tubing Bender is designed to make a typically time-intensive chore far simpler, quicker, and more precise. The NTB7L joins the NTE11L Power Tubing Expander and award-winning NEF6LM Power Flaring Tool in NAVAC’s family of battery-operated tubing tools.
Undermount Slide System
Kernersville, N.C.: Grass America, an industry-leading supplier of functional cabinet hardware, showcases their state-of-the-art Elite Plus Undermount Slide System. Elite Plus allows the cabinet design to take center stage by completely concealing the track and hardware under the drawer box. Utilizing undermount technology, a precision synthetic roller carriage, and a liquid damper enables Elite to operate smoothly, quietly, and consistently. The Elite Plus comes in a full range of standard lengths for 16mm (5/8") or 19mm (3/4") drawer thickness for both face frame and frameless cabinetry.
AER Configurable Condenser Fan
Regulates temperature and provides ventilation for equipment in demanding applications Greenheck’s AER direct drive configurable condenser fan can help regulate temperature and provide proper ventilation for your equipment, even in the most demanding applications where elevated water and temperature protection is required. Available in four sizes ranging from 20 to 36, the AER condenser fan offers performance up to 29,800 cfm and external static pressure up to 2.80 in. wg.
HomeSeal Xpress (HSX)
Aeroseal is the industry’s leading advanced and automatic air duct sealing solution. Backed by Bill Gates’ Breakthrough Energy Ventures and implemented in over 250,000 commercial and residential buildings, it is raising the energy performance of buildings by addressing air and duct leakage causing serious weaknesses. This is a consequential climate solution for the built environment. HomeSeal Xpress (HSX) is the latest and lightest iteration of Aeroseal’s technology.
Series e-90E Smart Pump
Bell & Gossett’s powerful new Series e-90E Smart Pump combines the industry-proven e-90 pump series with the Xylem Smart Motor – an “ultra-premium” IE5 permanent magnet motor with built-in pump protection controls and monitoring to help optimize pump operations and increase energy savings up to 70% (versus fixed speed). The combination allows for easy, cost-effective installation, and has a pre-configured system’s intelligence and performance right out of the box. The integrated pump solution eliminates the need for separate components by combining pump, motor and variable speed drive all in one. The e-90E is designed with state-of the-art technology to maximize efficiency and pump performance, coupled with the ability to communicate with other building systems in a simple-to-use product. Available in 12 combinations of high RPM models with the Xylem Smart Motor (3HP, 460V, 3PH), the e-90E has the flexibility to be used across various applications, including industrial, residential, HVAC and water boosting.
Square Exhaust Fan Cover
The Invi Air Exhaust fan cover is a great way to get our seamless finish from a product fully compatible with the most common bathroom exhaust fans on the market. It will create a perfect complement to the rest of your bathroom design. The face is magnetically latched into place to allow easy access to the fan behind for maintenance and cleaning.
QUANTM Electric Double Diaphragm Pump
Graco’s QUANTM electrically operated double diaphragm (EODD) pumps feature an innovative, extremely efficient design that is quiet, lightweight and provides significantly lower lifetime costs than other pump technologies. With built-in controls and no gearbox, they are ideal for applications that require low pulsation and a smooth flow. Designed to meet the growing demand for clean energy and sustainable technologies, QUANTM is the world’s first truly affordable electrically operated double diaphragm pump (EODD) built to minimize energy consumption, reduce operating costs, simplify maintenance and lower the cost of ownership. Each pump is ruggedly constructed and factory-tested to deliver a long, trouble-free product life.
Rogowski Coil CT Kit
The Rogowski Coil mV CT Kit contains three Rogowski coils, an integrator, and an integrator power supply. There are three versions of the kit – E183313-3 coverts 500 A to 0.333 V, E183313-1 converts 2000 A to 0.333 V, and E183313-2 coverts 4000 A to 0.333 V. The coils are highly accurate (+/- 1% accuracy); constructed with a protective, UV jacket; and sealed against tough environments, making them suitable for rugged industrial applications.
ITV9550 Battery Protector Series
Littelfuse Expands ITV9550 Battery Protector Series to Include 60 A Rating to Prevent Battery Pack Damage Designed for power tools, robotic appliances, and other consumer electronics applications CHICAGO, December 13, 2022 — Littelfuse, Inc. (NASDAQ: LFUS), an industrial technology manufacturing company empowering a sustainable, connected, and safer world, announced the extension of its ITV9550 surface-mountable Li-ion battery protector series. These fuses safeguard battery packs against overcurrent and overcharging (overvoltage) conditions. The latest ITV9550 addition provides a 60 amp, three-terminal fuse in a 9.5 x 5.0 mm footprint.
SQ Mixed Flow Inline Fan
Greenheck’s line of SQ direct drive mixed flow inline fans offering a unique combination of high efficiency, low sound, and ease of installation in a square housing design continues to expand and add enhancements. With the addition of sizes SQ-7 and SQ-9 covering lower CFM selections from 100 to 2,300 cfm, the SQ mixed flow line is now available in twelve sizes, 7-33, with performance ranges up to 27,800 cfm and up to 3 in. wg. A new side discharge option helps to reduce system effect, improves system performance, and reduces installation labor as fans are configurable with a variety of discharge options—inline, left, right, or any combination of the three.
ProSense Float Level Switches
More ProSense Float Level Switches from AutomationDirect AutomationDirect has added more low-cost ProSense float level switches. The new offering includes the FLS-VM-800 float switch which has a 3/4" PVC pipe fitting for use in HVAC condensate lines, and the FLS-VD series that includes a 3/4" MNPT connection for mounting to most standard 3/4” bungs in 55-gallon drums. A selection of top- and side-mount float switches, in medium and large sizes, has also been added with various material constructions for compatibility with a variety of liquid types, temperature ranges, and system pressures. The new ProSense float level switches are UL recognized, CE marked, RoHS compliant, come with a 1-year warranty, and start at $17.25. Learn more by visiting: https://www.automationdirect.com/float-level-switches.
Dold Safety Relays
Additional Dold Safety Relays from AutomationDirect AutomationDirect has added new models of Dold safety relays to their line of safety products. This addition includes more motor standstill monitoring relays with models that support muting, as well as safety relay extension modules with more outputs for safety system expansion. The new Dold safety relays start at $167.00 and come with a one-year warranty. Learn more by visiting: https://www.automationdirect.com/safety-relays.
EV tool kit
Cementex Highlights the Automotive Electric Service Tool Kit Customizable insulated tool kit ideal for service on hybrid and electric vehicles Burlington, NJ – Cementex, the safety tool specialists, highlights the Cementex Automotive Electric Service Tool Kit (ITS-12B-AES), a great base of insulated tools for use with hybrid and electric vehicles (EVs) as well as troubleshooting and repair to EV charging stations. Stored in a standard tool box, this tool kit includes Cementex double-insulated Diagonal Cutting, Needle Nose, Slip Joint, Crimping, and Water Pump Pliers, as well as a variety of double-insulated Cushion Grip screwdrivers. Cementex double-insulated tools are Made in the U.S.A. Cementex tools are tested to 10,000 VAC and rated for 1,000 VAC/1,500 VDC when working on energized parts, and are marked with the (double-triangle) international safety symbol. As with all Cementex tool kits, these combinations of tools can be customized to fit an individual customer’s needs.
22PDP Sensors
Belimo's new 22DPD sensors for wet-to-wet differential pressure measurement utilizing remote sensors in HVAC systems On December 2, Belimo released new 22PDP-585 and 22PDP-588 active sensors (4...20 mA / 0...5 V / 0...10 V) for wet-to-wet differential pressure measurement utilizing remote sensors in HVAC systems. The sensors are suitable for water and water-glycol mixtures. The 22PDP reduces installation time and material costs with external sensors by connecting the high and low side sensors at the measurement point. The hinged cover and spring-loaded terminal block save wiring time and ensure reliable contact.
Anodized Aluminum with Antimicrobial Properties
For those of you who want surface protection and minimal bacteria collection on surfaces, consider the benefits of Lorin Anodized Aluminum. In addition to all of the other benefits of anodized aluminum, Lorin’s proprietary anodizing process delivers antimicrobial properties backed by independent lab testing. Lorin worked with an independent third party lab to test the antimicrobial properties of Lorin Anodized Aluminum. Testing with (Escherichia coli) resulted in a reduction in concentration of the bacteria 74% to 99.7%.
CONFAST’s 7 Piece Masonry Hammer Drill Set
To easily drill a hole in a concrete brick, block, and masonry you will need a hammer drill with high quality carbide dipped drill bits. CONFAST now has tungsten carbide tip bits set for you to drill into concrete available for sale on our website. The tungsten carbide tips will help your bits last longer compared to typical steel drill bits.
Island Canopy Stainless Steel
Island Canopy Hoods, Stainless Steel, Chemical Resistant Stainless Steel Island Canopy Hoods are designed to collect and exhaust corrosive vapors, soldiering operations, heat, steam, and odors when mounted over areas with water baths, hot plates or portable equipment. Manufactured of Stainless Steel, Island canopy hoods are lightweight and can be suspended from the ceiling over island locations using steel pipes. The canopy fume hood’s smooth surfaces provide superior chemical, corrosion and heat resistance.
HAP
HAP is designed for consulting engineers, design/build contractors, HVAC contractors, facility engineers and other professionals involved in the design and analysis of commercial building HVAC systems. The program is a powerful tool for designing systems and sizing system components as well as modeling annual energy performance and energy costs.
DRIVEFLEX AND MOTIONFLEX VFD Cables
New LUTZE DRIVEFLEX AND MOTIONFLEX VFD Cables from AutomationDirect AutomationDirect has added new LUTZE DRIVEFLEX® and MOTIONFLEX® variable frequency drive cables which provide supreme protection against electromagnetic interference (EMI). These cables are available in 18 to 8 AWG sizes and include four black conductors with a green/yellow ground conductor of the same gauge. Each conductor is labeled for easy identification and is covered in a cross-linked Polyethylene (XLPE) insulation (type XHHW-2) that is oil and sun resistant, suitable for dry, damp, or wet locations, and approved for direct burial. The DRIVEFLEX series has a black PVC outer jacket ideal for stationary applications, while the MOTIONFLEX series has a black thermoplastic elastomer (TPE) outer jacket designed for continuous motion applications. Both cables are tray cable-exposed run rated (TCER) for use in cable trays with or without conduit, which can significantly reduce installation costs. The new DRIVEFLEX series cable starts at $2.58 /ft.
Air Distribution Products
GREENHECK LAUNCHES AIR DISTRIBUTION PRODUCT LINE New Product Line Allows for Single-Source HVAC System Specification Greenheck recently added air distribution products to its industry-leading product line making it even easier to specify a complete ventilation system from one supplier. Greenheck’s air distribution products include an extensive selection of grilles, registers, diffusers (GRDs), and air terminal units (ATUs) that are designed, engineered, and tested to meet a wide range of performance and aesthetic requirements. Greenheck offers hundreds of air distribution product models including supply and exhaust grilles and registers, ceiling diffusers, linear diffusers and grilles, plenum slot diffusers, and VAV diffusers.
Drum Pump Kits
Finish Thompson Inc., a global leader in chemical pump solutions, introduces 12 new drum pump kits series designed based on specific classes of chemicals, container types, and flow ranges. The kits are available for applications ranging from non-corrosive to mildly corrosive liquids, corrosive liquids, extremely corrosive liquids, water treatment chemicals, mineral oil, flammable liquid, diesel exhaust fluid (DEF) / AdBlue, and FDA-compliant materials. They’re available in both high-volume and medium-volume options for various types of fluids and containers. The new kits make it easier for a distributor to sell and an end customer to buy a complete drum pump package designed to handle a certain type of fluid. Now, instead of researching and specifying a pump and motor, a single part number can be specified and purchased based on the application. Kits include everything in one carton for convenience: • Drum pump tube • Motor • Discharge tubing • Nozzle • Wall bracket • Additional accessories depending upon the model Benefits of powered container transfer pumps include risk reduction, versatility, portability, speed, and durability.
WeatherMaker 50FCQ Single Package Heat Pump Rooftop Series with EcoBlue Technology
The complete lineup of Carrier’s WeatherMaker 50FCQ packaged heat pump products begins at 3 tons and expands all the way up to - an industry first – 25 ton unitary rooftop unit (RTU) heat pump. The entire lineup offers our patented vane axial EcoBlue indoor fan system, which provides excellent external static pressure capability and an unprecedented ease of set up. EcoBlue offers reliable ECM powered vane axial fans that are up to 40% more efficient while using 75% less moving parts than a traditional belt driven fan system.
DryerWallVent
InOvate, a manufacturer of premium residential construction venting products, has expanded its product line with a new paintable version of its popular DryerWallVent – DryerWallVent Paintable Model. Featuring a sleek, clean-lined design, Prime DryerWallVent allows professionals to provide homeowners with DryerWallVent color choices that go beyond the standard White, Tan, Brown and Black offering, adding versatility and the ability to blend with virtually any color palette. “Now, with seemingly infinite options to beautify exteriors, builders have more control in making sure the exterior of a home is as beautiful as the interior,” said Todd Peach, vice president of marketing at InOvate. “This latest addition to the DryerWallVent family provides the same high quality features of our DryerWallVent venting solution while enabling a seamlessly integrated aesthetic for enhanced visual appeal.” DryerWallVent Paintable Model (Model DWV4P) is a paintable model that features PPG’s Enviracryl® and Envirocron® powder coatings, producing a uniform, weather-resistant finish. In addition, DryerWallVent offers rugged durability through its deep drawn Galvalume® heavy gauge steel construction. Engineered for both vent replacement and new construction, Prime DryerWallVent meets or exceeds all code requirements for safe dryer venting. The vent mates easily to any four inch duct work for quick installation. Features.
Quick Connects
Power panels enable regulated facilities to comply with requirements such as Article 700.3(F) of the National Electrical Code. With Quick Connect Panels, a facility with one generator can access supplemental backup power when its primary generator is taken offline. A facility without a permanent generator can gain a means for obtaining temporary backup power during outages.
T1 Rotary Lobe Pump
The TORNADO T1 pump can handle a wide range of viscosities, solids, temperature, abrasion, and corrosive/acidic process fluids and environments. The TORNADO T1 pump is extremely versatile for just about any orientation and installation. Its robust design offers longevity, operational flexibility, and dry-run capabilities. It allows the pump to operate and handle many upset process conditions without causing harm to the pump.
IDEM Rotary Trapped Key Systems
IDEM Rotary Trapped Key Systems from AutomationDirect AutomationDirect has added IDEM Skorpion rotary trapped key systems. These safety systems control access to running equipment with locks and rotary keys. To disable power to machinery and unlock a gate, the key is turned and removed from the control switch. The released key is then inserted into the gate access module to unlock the gate. Standard and solenoid-locking control switches and associated gate sets (sold separately) are available for one to three stations and provide mechanical safeguarding in partial or full body access versions. They are rated for safety applications up to Ple/Category 3 according to EN/ISO 13849-1.
YORK Sun Choice Ultra High-Efficiency Rooftop Unit
The 12.5- to 23-ton YORK Sun Choice Ultra High-Efficiency Rooftop Units (RTU) surpass DOE 2023 standards by up to 45%, delivering the highest part-load efficiency in their class. Efficiency is achieved using a combination of Copeland™ high-efficiency ZPKZ fixed-speed, ZPS two-stage and ZPV variable-speed compressor technologies and ECM outdoor fan motors. A convertible filter rack with MERV 13 filters, demand control ventilation and economizers with modulating power exhaust are available to meet stringent indoor air quality (IAQ) requirements. Multiple airflow strategies – including variable air volume and exclusive IntelliSpeed™ discrete fan control with variable capacity control –improve temperature and humidity accuracy to deliver maximum occupant comfort.
High Surge Rating SMD TVS Diodes
Littelfuse, Inc. (NASDAQ: LFUS), an industrial technology manufacturing company empowering a sustainable, connected, and safer world, announced the new SMTOAK2 TVS Diode Series. Many of today’s high-power, high surge rating TVS diodes are only available in axial leaded packages.
External Manual Operator (E.M.O.) on Automatic Transfer Switches
The External Manual Operator (E.M.O.), a standard feature of the Russelectric RTS-03 Series and RTS-30 Series of open-transition automatic transfer switches, the most rugged and complete line of 480 VAC 30-cycle and 3-cycle UL tested switches available in the market today. The unique E.M.O feature enables easy, safe, and quick manual transfer with the door fully closed, significantly reducing downtime and the risk of arc flash injuries. With the E.M.O, the manual transfer process is easier and faster for both the preferred and the alternative power sources, and no special procedures are required to ensure the system is de-energized during the transfer operation. That means less downtime because the cabinet door remains closed. The E.M.O utilizes the same Russelectric transfer mechanism as the automatic electrical operator, a design proven to provide exceptional safety and durability.
CONFAST Yellow Plastic Ribbed Anchor for Light Duty Applications
The CONFAST 3/16" x 1" 8-10 Yellow Plastic Ribbed Anchor is an ideal solution for fastening objects to drywall, hollow wall and block. These plastic ribbed anchors are intended for light duty applications, such as attaching a small shelf or towel bar to the wall.
Linear LED lighting Gen-2
Eaton's Crouse-Hinds series MLLA, DLLA and PLLA Linear LED fixtures for non-hazardous, hazardous and wet environments are now available with enhanced features that help improve performance and application flexibility. With improved lumen output: 130 – 134 efficacy lm/W and additional driver space, the solution provides more room for wiring while simplifying installation. The pendant mount is now integral to the fixture and mounting kits are shipped with the fixture based on the mounting type selected within the catalog structure.
Quick Fitting Electrical
Quick Fitting, a leading manufacturer of quick connection technology for plumbing, electrical, industrial, municipal, and OEM applications, highlights its push to connect Quick Fitting Electrical connectors, which make Quick Fitting’s quick connection technology available for electrical connections. QuickFitting Electrical delivers easy, one-hand use connections for PVC Rigid Schedule 40 and 80 conduits. Quick Fitting Electrical connectors install quickly with no tools needed, saving significant time. Designed for ease of use, its push-on installation can be carried out with one hand.
Wireless Integrated Fixture Sensors and Controllers
The Intellect Wireless Integrated Fixture Sensors and Controllers solve lighting control problems with no separate sensor layout needed. The product was engineered to be installed directly into luminaries to enable wireless networking in a GreenMAX DRC Wireless Lighting Control System. Virtually any fixture can be intellect-enabled for an integrated in-fixture wireless control solution.
HV600 UL Type 12 Narrow Electronic Bypass
The HV600 UL Type 12 Narrow Electronic Bypass redefines the form factor. It is nominally larger than the equivalent UL Type 1 solution while being approximately three times narrower than a traditional UL Type 12 enclosed solution. The UL Type 12 offers increased protection against dust and unexpected moisture.
eCAPS BRIDGE TO REVIT
GREENHECK’S eCAPS BRIDGE TO REVIT STREAMLINES PRODUCT SELECTION Software Plug-In Saves Time in Creating Schedules Greenheck’s eCAPS Bridge to Revit plug-in provides access to the most complete catalog of HVAC product content in Greenheck’s eCAPS online product selection program and makes it easy to select and schedule HVAC equipment without leaving the Revit environment. The plug-in enables specifiers to make model or performance-based selections and seamlessly insert Level of Development (LOD) 200 and 300 content directly into Revit projects. The eCAPS Bridge to Revit plug-in also saves users time by automating the schedule creation process.
Polar Self-Adhered Membranes
It’s not too cold yet… Roofing Season is officially extended through winter with Polyglass Polar Self-Adhered Membranes! Polyglass U.S.A., Inc., a leading manufacturer of roofing and waterproofing systems, is extending roofing season once again with the seasonal release of Elastoflex SA V Polar Base® and Elastoflex SA P Polar Cap®. Optimized for performance in colder conditions, these resilient roofing membranes save on labor and provide contractors the opportunity to extend roofing season. Elastoflex SA V Polar Base and Elastoflex SA P Polar Cap allow for roof system installation in temperatures that are between 25°F – 60°F (4°C – 16°C). The products have unique qualities that improve efficiency and are designed for long-term performance.
Renewable power plant controller hardware
The ePPC is a model-driven power plant controller and eSCADA solution for generation plants. ETAP utilizes the model-driven electrical digital twin with automated analysis, predictive calculations, network optimization and validation processes, combined with intelligent and secure power plant controller hardware to ensure local grid code or standards compliance are maintained throughout the power system design and operations lifecycle. The solution guarantees optimized performance and maximum yields under various grid and plant operating conditions and ensures transmission system operator stability and power quality requirements are met at the point of connection. ETAP https://etap.com.
CCEA SIRIO Q Series LED Work Lights
CCEA SIRIO Q Series LED Work Lights from AutomationDirect AutomationDirect has added CCEA SIRIO Q series LED work lights to expand their offering of industrial LED fixtures. These rugged, industrial-grade light bars are ideal for tractors, trucks, trailers, off-road vehicles, and earth-moving machines. Providing up to a 1750 lumen output, these work lights feature an aluminum head on a pan-and-tilt stainless-steel bracket, allowing precise light adjustment in any direction. AC or DC powered models are available with 40° or 60° beam angles and have an IP67/69 protection rating. CCEA SIRIO Q series LED work lights are UL recognized, CSA approved, CE marked, and RoHS compliant.
Series 6000 Panel Mount Meters
Leviton recently introduced the new VerifEye™ Series 6000 Panel Mount Meters. The meters are designed to monitor a comprehensive data set of electrical parameters for industrial applications. Ideal for power distribution panels and custom panel shops, these meters fit in a standard 92mm x 92mm panel mount cutout and are offered with a range of Split Core and Rogowski smart current transformers (CTs) to cover a broad range of applications. Industrial processing facilities are major consumers of electricity and other utilities that often need to monitor industrial processes for profitability.
Copeland Oil-Free Centrifugal Compressor
The Copeland oil-free centrifugal compressor is a high-speed turbomachine delivering high performance with groundbreaking Aero-lift bearing technology. This new low complexity bearing solution will disrupt the HVAC/R market, spawning a powerful wave of demand and shift towards economically viable oil-free technology across a wide range of applications. This is a compressor that compresses low GWP refrigerant without the requirements of oiled lubrication such as screw technology.
RTS-30 Series of Automatic Transfer Switches
Russelectric RTS-30 Series of automatic transfer switches for hospitals, healthcare facilities and other critical facilities, the most rugged and complete line of 480 VAC 30-cycle and 3-cycle UL tested switches available in the market today. All Russelectric RTS-30 Series automatic transfer switches have been fully tested, listed, and labeled for 30-cycle and 3-cycle closing and withstand ratings under UL-1008. In addition, the RTS-30 meets all requirements for legally required standby systems for selective coordination. The RTS-30 Series of transfer switches feature preloaded springs and an over-center mechanism driven by an electric operator for opening and closing the power contacts.
Press Fit Valve Assemblies
Belimo releases a new press fit valve assembly series Danbury, CT, September 28, 2022 – Belimo Americas announces the release of QCV (pressure dependent) and PIQCV (pressure independent) ZoneTight zone valves with new press fit connections for fast, consistent, and reliable installation. Zone valve assemblies are designed and engineered for maximum efficiency in tight spaces and are suited for commercial buildings where higher close-off and adaptable flow are desired. - Assemblies accommodate chilled or hot water, 60% glycol, and a body pressure rating of 250 psi. - Zero leakage ball valve design eliminates energy losses and is resistant to clogging. - Available pressure dependent range 1/2 to 1" and pressure independent 1/2 - 3/4". - Lower power consumption up to 95% less than conventional zone valves. - Field adjustable flow to meet your design requirements. "For OEMs and contractors, these new zone valve assemblies with press fit connection provide a fast installation and energy-efficient solution. Unlike any other zone valve on the market today, the valves are field adjustable, allowing you to adjust the pressure to suit your needs," states Russ Brown, Product Manager. Typical applications include unit ventilators, fan coil units, VAV reheat coils, fin tubes, and radiant panels.
RVC Rooftop Ventilator with Energy Recovery Core
Greenheck Announces Model RVC Rooftop Unit with Enthalpy CoreNew Model RVC Provides Low Maintenance Energy Recovery Greenheck’s new model RVC (Rooftop Ventilator with Energy Recovery Core) is the latest addition to its dedicated outdoor air systems line for high percentage and 100% outside air applications. Model RVC incorporates a total enthalpy core that provides both sensible and latent heat transfer and meets ASHRAE 90.1 minimum efficiencies. The enthalpy core’s cross-flow design prevents supply and exhaust airstreams from intersecting resulting in an Exhaust Air Transfer Ratio (EATR) of 0 to 1% per AHRI 1060 testing. Model RVC is available in three housing sizes with airflow up to 15,000 cfm and 5 to 70 tons of packaged DX cooling capacity.
Copper Street Fitting
Quick Fitting Expands its Quick Fitting Copper Products with Street FittingsStreet Elbows Enable Fast and Easy Offset Pipe Installation WARWICK, RI – Quick Fitting, a leading manufacturer of quick connection technology for plumbing, electrical, industrial, municipal and OEM applications, announces that it is expanding its market-leading Quick Fitting Copper products with the launch of its Quick Fitting Copper Street Fittings. The patented design of these street elbows facilitates a fast and simple installation of offset pipes. One of the primary use cases of Quick Fitting Copper Street Fittings are offset pipe installations, which are made quick and easy by the distinctive design of these street elbows.
VESDA Air
Honeywell (Nasdaq: HON) today launched a first-of-its-kind solution that combines early warning smoke detection with advanced indoor air quality (IAQ) monitoring, furthering its efforts to create safer and healthier buildings. Built on the flagship VESDA-E line of aspirating smoke detectors, the VESDA Air solution has a unique five-in-one IAQ sensor within a single box, which can help improve building safety by identifying life safety, asset protection or IAQ issues before they escalate into problems. VESDA Air complements Honeywell’s ready now Healthy Buildings solutions that can help improve occupant well-being, meet energy efficiency goals and, importantly, change the way occupants experience a building.
SSP Safety Enabling Switches
SSP Safety Enabling Switches from AutomationDirect. AutomationDirect has added SSP safety enabling switches, also known as “hold-to-run” or “dead man’s” switches. When used in conjunction with a properly designed safety system, they provide the operator with a special control mode for tasks such as maintenance or debugging of hazardous equipment.
Stego Thermal Management Products
More Stego Thermal Management Products from AutomationDirect. AutomationDirect has added new additions to their existing Stego line of thermal management products for even more enclosure heating and cooling solutions. Top-mount filter fans, in axial or high-capacity versions, and compatible vents are now available to provide a low-cost cooling option for enclosures.
DRD Modular Downlighting System
Designed to install into any application including sloped, wood and concrete ceilings, the next generation DRD Series is engineered for ultimate flexibility. The modular solution (housing, module and trim) features a module integrated with a choice of multiple color temperatures, field-changeable beam angles from 15 to 90+ degrees, 120/277 voltage regulation and 1% dimming. A single housing – round and square apertures – accommodate 98% of downlighting applications including fixed, adjustable and wall wash from a choice of over 50 unique trims. Precision-crafted aluminum trims meet design aesthetic of any project including pinhole and flangeless – all offered in standard finishes or custom color.
Athena Wireless Node
Lutron is announcing a new upgraded, cloud-connected Athena system allowing engineers to do more with a single system and expanding data-analytic capabilities. System enhancements support the need for connected solutions that deliver building management insights, simplify ongoing system adjustments, and continue to add value over time. It has two powerful new features: Athena wireless node is an ultra-small, individual, wireless fixture control packed with technology to ensure you can easily and quickly adjust light settings by fixture, zone, or a combination of both.
Electrical outlet box assembly
UL Listed Quick-Lok outlet boxes help simplify rough-in installations by providing more space to install and manage cables. The box features an exterior connector with an integral insulator and removable KO plug per cable location, which helps maintain available space within the box for device wiring. It also easily accepts internal fire pads and includes a ground bump with pre-installed ground pigtails standard, making this the ideal solution for prefabrication.
Eluxa life safety notification devices
Eluxa features a complete portfolio of indoor notification appliances with a comprehensive range of low and high candela settings, six candela settings in a single device. Utilizing the latest advancements in LED technology, Eluxa features the industry’s lowest current draw across the full candela range, providing the ultimate in energy efficiency. Competitive models can draw up to 3 times the current, and an average circuit consumes 70% more current than Eluxa devices.
Aidoo Pro Inverter/VRF Controller
The Airzone Aidoo Pro is a simple-to-install system add-on that sits between the HVAC system and IoT control devices such as third-party smart thermostats, voice assistants, and home automation. Airzone’s exclusive library of manufacturer-certified HVAC protocols enables full two-way communication between the Aidoo Pro, the HVAC solution, and smart thermostats or other connected devices. The Aidoo Pro receives smart thermostat data via API, interprets it, and then sends the appropriate commands to the inverter unit via manufacturer-certified protocol.
Blue e+ S Smart Cooling Units for Enclosures
Rittal North America expands its smart cooling unit solutions for enclosures with the Blue e+ S that has lower output categories of .3 kW, .5 kW, and 1 kW. Additionally, the Blue e+ S offers smart capabilities and innovative energy-saving features for the production process. This latest generation of Blue e+ S cooling units have been designed for efficiency helping to ensure a smaller footprint, provide energy savings, minimize CO2 emissions, and lower costs. Energy-savings and therefore cost reduction is enabled due to the technology used, combining a heat pipe with inverter-controlled components.
MC Glide Fire Alarm Control Cable
The unique armor profile of MC Glide Fire Alarm reduces friction and glides easily without sacrificing flexibility and strength, saving time and labor costs compared to traditional metal-clad cable. In addition, the MC Glide Fire Alarm is manufactured from high-strength, galvanized steel that delivers durability, higher corrosion resistance, and a better shield against electromagnetic fields than an aluminum armored fire alarm cable. Meeting all requirements of UL 1569 and UL 1424, MC Glide Fire Alarm Control Cables are compatible with the installers' current tools and fittings, which saves time and money.
30-ton packaged cooling system
Ruud Resolute 30-Ton is a 30-ton packaged system with field-convertible airflow and standard single-zone and multi-zone Variable Air Volume (VAV). Engineered to deliver superior zoned comfort, Resolute is the easy choice for its ease of installation and serviceability features for a variety of commercial applications. Hinged access panels, single-point wiring, and slide-out assemblies that all come standard attract contractors.
Cat D30 diesel generator set
Powered by the Cat® C2.2 engine, the Cat D30 generator set meets the U.S. EPA’s emergency emission standards as well as all applicable UL and C-UL standards. It features exceptional performance, a minimal footprint, prompt parts availability, and optional steel or aluminum enclosures. Leveraging field-proven Cat engines already used in heavy-duty equipment around the world, it is ideal for a wide range of small standby applications, such as small healthcare, retail and commercial enterprises, telecommunications, water and wastewater treatment operations, municipal infrastructure, and office buildings. The Cat D30 generator set includes Caterpillar’s standard two-year warranty for standby power solutions, with a suite of additional extended service coverage options available.
DCC Cylinder Series
The DCC series of LED surface-, wall-, cord- and stem-mount cylinders provides an unmatched level of flexibility and customization with a choice of over a million configurations. Designed for indoor and outdoor applications (IP65 Rated), the sleek series is a modular cylinder system that combines plug and play LED modules featuring DMF’s advanced LED technology, with interchangeable, twist and lock trims and shades, providing a multitude of style variations and easy maintenance and on-site modifications. Featuring a sleek, modern design with no visible hardware, the DCC cylinders’ IP65 rating underwent rigorous water testing, going beyond what third-party accreditation organizations conduct, even submerging underwater.
Male Hurricane Anchors
CONFAST 1/4"-20 x 2-1/4" Male Hurricane anchors install quicker and more efficiently than other storm protection anchoring products. For concrete and concrete block applications, drill pilot hole and drive the anchor in, it’s that easy. Pre-drilling is not required in wood base materials.
15- to 25-ton packaged cooling system
The extension of the Rheem Renaissance lineup into capacities ranging from 15 to 25 tons delivers innovative technology for improved efficiency and comfort like the flexible footprint, patent-pending Velocifin gas heat exchanger, and a patent-pending cooling system design. The Renaissance flexible footprint with dual returns was designed to fit over most existing roofcurbs, making replacement projects easier, faster and most cost effective. The cooling system design features indoor and outdoor intertwined microchannel systems, a first for commercial packaged systems, which provides higher part load efficiencies and delivers up to 15 IEER. Rheem Manufacturing Co. http://rheemcommercial.com.
Fire alarm pull station
The UL-listed MPS-800 series pull station for addressable and conventional fire alarm systems is constructed of high-quality polycarbonate resin thermoplastic LEXAN that supports high temperatures without deforming. The pull stations can be mounted on a single gang backbox with wiring accessible from the front, making it easy to install. In compliance with the Americans with Disabilities Act, the pull station can be operated with a closed-fist and uses raised symbols and icons instead of printed text to ensure it is universally recognized.
Gallery XL Track Luminaire
ConTech Lighting by Leviton today announced the introduction of the new Gallery XL Track Luminaire designed for the demands of museums, retail displays, and other architectural spaces. The new Gallery XL Track Luminaire features a flat back cylinder form and an integral driver which creates a simple profile that disappears in a space. An adjustable arm is integrated seamlessly into the form of the fixture to eliminate any visible wiring or adjustment hardware while still allowing 0-100 degrees of vertical adjustment and 365 degrees of horizontal adjustment. Vertical angle guides are provided to allow pre-aiming and a discreet locking screw provides additional security to ensure that adjustments will be maintained. The five different beam distributions begin with a 10-degree option that utilizes a dual lens optic and delivers a well-defined beam with minimal field.
Antimicrobial Treated Decora® Slide Dimmer
Leviton today announced the introduction of its Antimicrobial Treated Decora Slide Dimmer. The device, the first antimicrobial treated dimmer on the market, is the latest addition to the company’s current offering of antimicrobial treated Decora Switches, Toggle Switches, and Wallplates. Replacing traditional devices with antimicrobial treated products provides a practical solution to help keep the surface of devices and wallplates cleaner throughout the home. By incorporating an antimicrobial additive into the product material, Leviton Antimicrobial Treated Devices help to inhibit the growth of mold, mildew, fungi, and odor-causing bacteria on the surface of the device between normal cleanings. The Leviton Antimicrobial Treated Decora Slide Dimmer is designed for optimal control of dimmable LED and CFL bulbs as well as incandescent.
Centum Series Generators
Cummins' Centum Series generators are engineered to meet customers’ precise power needs with high-efficiency engines that fit in a smaller footprint. With the Centum Series, a user specifies exactly the needed power — no more, no less. The Centum Series is a high-performance, high-power density system that delivers the power users need in a smaller footprint, enabling them to hit performance specifications without being required to buy more than needed.
Cummins Centum Series Generators
Cummins Inc. (NYSE: CMI) today introduced the first set of Centum Series generators with a virtual event. These new generator sets are engineered to meet customers’ precise power needs with high-efficiency engines that fit in a smaller footprint.
#10-12 Plastic Conical Blue Bantam Anchor Kit
This new CONFAST® fastener kit is great for many light-duty uses - Install doorbells, curtain rods, pictures, light mirrors, photo frames, lights in drywall, plaster board, gypsum board, brick wall, concrete wall or wood wall. Easy to Install - use included bit to drill hole, insert the anchor, and place the item against the wall over the anchor, then drive the screw through the hole into the anchor.Designed to prevent problems during installation - ribs prevent anchor from spinning in the hole while tightening the screw Plastic Anchor material protects against rust and corrosion.The bantam plastic anchor is intended for light duty, non-critical applications. It can be used with a variety of foundation materials, including concrete, block, and brick. Although it is possible to use in wallboard, the holding values may vary and be unpredictable depending on the application.
EDSX/DSDX control station
The Crouse-Hinds series EDSX/DSDX are factory-sealed hazardous control station assemblies with pushbuttons, pilot lights and selector switches. Factory sealed devices help eliminate the need for explosion-proof conduit seals in any Class I, Division 2 application. The Class I, Division 2 assembly provides NEMA 4X protection against water ingress and corrosion in the most demanding conditions.
SwitchFire
The SwitchFire boiler is a high-mass, fully condensing firetube boiler constructed of 316L stainless steel designed to handle variable flow pumping, featuring a low waterside pressure drop, large water volume, and a low flow tolerant design. The SwitchFire is the result of decades of boiler engineering experience, combining Cleaver-Brooks core firetube boiler technology with key design aspects of the ClearFire condensing boilers to offer the most efficient dual fuel condensing boiler on the market. Utilizing a Weishaupt burner and controls, the SwitchFire offers industry leading efficiencies and performance with both natural gas and #2 fuel oil firing.
Ascend Air-to-Water Heat Pump Model ACX
Trane’s Ascend air-to-water heat pump model ACX combines chiller and heat pump technology to both heat and cool a building using electricity. In cooling mode, the model ACX moves heat from inside the building to the outside. In heating mode, a reversing valve changes the flow of energy to bring heat from outside of the building to the inside.
Precedent Enabled by Symbio 700
Trane's new generation of Precedent rooftop units meets the next era of energy efficiency requirements. The Precedent portfolio will include capacities from 3-25 tons, a full range of tonnages and heating types, and improved efficiency levels. The new single-product family of light commercial unitary rooftops will be released in phases now through 2024. Available immediately, the Precedent standard efficiency 6- to 25-ton cooling and gas units feature various improvements and upgrades, including part-load efficiency ratings that comply with new industry efficiency requirements.
Liquatite Flexible Conduit
ELECTRI-FLEX COMPANY manufactures American Made flexible conduit solutions from their facility in Roselle, IL. Liquatite® conduits are also sourced from American Made materials, providing top-quality solutions that are both Buy America and Buy American (ARRA) Compliant. Locally sourced conduit materials arrive faster than those sourced internationally, leading to quicker turnaround times, and getting products in the hands of customers for faster installations. Made in America, For AmericaElectri-Flex manufactures an assortment of Liquatite® flexible conduits that are Made in the USA.
MultiSPEC SP-LP Exhaust Fans
GREENHECK MULTISPEC EXHAUST FANS DELIVER INDUSTRY-LEADING PERFORMANCE Greenheck’s new MultiSPEC SP-LP ceiling exhaust fans provide high efficiency, powerful performance, and quiet operation in a low profile design. Powered by an electronically commutated motor (ECM) with constant CFM adaptive, variable speed technology, the MultiSPEC SP-LP is programmed to overcome static pressures of 0.4 in. wg and above associated with common multifamily installations.
PaveScan Family for Asphalt Density Assessment
GSSI, the world’s leading manufacturer of ground penetrating radar (GPR) equipment, highlights the PaveScan RDM 2.0 and PaveScan Mix Design Module (MDM) for asphalt density assessment. Using PaveScan MDM and RDM gives paving contractors a comprehensive and accurate view into pavement quality without the expense, risk, and errors from spot coring. More importantly, reducing the need to core exposes fewer workers to the dangers of work zones.PaveScan RDM is ideal for uncovering problems that occur during the paving process, including poor uniformity and significant variations in density.
Quick Fitting Copper Slip Repair
Quick Fitting Copper Slip Repair Couplings are the fastest and easiest way to permanently and reliably fix pipe leaks and breaks. Suitable for copper, PEX and CPVC tubing, the Quick Fitting Copper Slip Repair Couplings are essential supplies that every plumber should store in their truck and every cautious homeowner should have available, especially as the winter months approach.For most repairs, only a single Slip Repair Coupling is needed, compared to the two sweat copper fittings that are traditionally used. There is no need to find and prepare a length of a specific pipe type to go in between.
Lorin ClearMatt Offers High Performance and Aesthetics
Lorin Industries, Inc., the global industry leader in the innovation and production of coil anodized aluminum, highlights their leading product, ClearMatt Architectural Class I finish for exterior applications. ClearMatt is ideal for architectural projects for a range of architectural and construction applications, including in the use of exterior paneling for facades as well as cool roofs. For these reasons, ClearMatt anodized aluminum is featured on a multitude of iconic buildings.Lorin ClearMatt aesthetically offers a beautiful metallic look that only comes from the three-dimensional look of anodized aluminum.
Audio Accessories & Streamwide Solutions
Pryme Radio, a premier provider of audio technologies, joined forces with Streamwide solutions to enhance wireless push-to-talk over cellular communications for industries worldwide.Today’s teams need next generation applications and advanced audio technologies to communicate effectively. To meet these needs, Pryme® partnered with Streamwide to provide more streamlined collaboration and enhanced push-to-talk over cellular (PoC) communications for industrial users. Streamwide's Team on mission platform is an all-in-one solution that enables united, secure PoC communications for verticals like medical, defense, public transit, and construction. Pryme’s wireless PTT accessories elevate user experience and augment mission-critical operations. Streamwide also offers Team on the run (TOTR) for commercial applications in fleet management, manufacturing, retail, and facilities.
Anchoring System
Cintec Anchors were used. as the anchoring system for the replacement windows at the PS-41 School in the BronxAnchoring into Terra-Cotta Clay Speed Tile New York Schools Construction Authority The Property PS 41 is a co-educational public school for grades 1-5 located in Bronx, New York City. Their Mission: “At P.S. 41, we nurture and serve every child to be productive citizens while reaching their highest potential.” The Problem The original windows in the building needed to be replaced.
Day-Brite FBZ LED High Bay Fixture
Signify’s Day-Brite FBZ LED High Bay fixture transforms large spaces with energy-efficient, direct illumination. It offers a targeted optics solution, reducing the number of luminaires needed to achieve your optimal lighting. The result? Less complexity in your lighting plan and greater energy savings – of up to 40%! It has a lean design (available in two sizes) to support a variety of climate and non-climate-controlled spaces.
Emergency Power System for Wastewater Treatment Plants
Russelectric offers its robust and reliable Emergency Power System which provides backup power during a utility power loss. The paralleling switchgear systems offer redundant programmable logic controller (PLC) controls and manual backup capability. Trusted by the largest critical facilities in the world, the Russelectric Emergency Power System has been used by wastewater treatment plants.Complete systems are custom designed and fully manufactured by Russelectric.
Type S Series – Transparent Test & Development Vessel
The new addition to the S Series, has been specifically designed to meet the needs of products and component testing, academic and scientific experimentation, and research & development. Fully customisable, the S Series can be configured to your specific requirements. This enables researchers, developers and designers to quickly and effectively replicate a whole series of environments in the lab, with full control of pressure, temperature and, where needed the option to add agitation.
HCD-130LE and HCD-230LE Industrial Control Dampers
GREENHECK ADDS TWO NEW INDUSTRIAL CONTROL DAMPER MODELSDesigned to Control Airflow in Lab Exhaust SystemsGreenheck has expanded its line of industrial control dampers with two new models specifically designed for lab exhaust systems. Models HCD-130LE and HCD-230LE are heavy-duty flanged-style frame industrial control dampers with fabricated airfoil blades designed to control airflow and provide shutoff in lab exhaust systems. The HCD-130LE has pressure velocity capabilities up to 8.5 in.
Quick Fitting Brass
WARWICK, RI – Quick Fitting, a leading manufacturer of quick connection technology for plumbing, electrical, industrial, municipal, and OEM applications, announces that its Quick Fitting Brass push-to-connect fitting delivers fast and easy installation in commercial applications with greater safety and efficiency for installers. Removable, reusable, and repositionable Quick Fitting Brass is a superior choice to other pipe connections, as it is guaranteed to make a perfect connection every time.With its push-to-connect fitting, installation is easy and requires fewer steps than other connection types. What’s more, without any soldering, gluing, or crimping required, safety is greater, risks lowered, and installation made faster, all of which provide economic benefits to end users.
Digital Rotary Torque Sensor 0.1 Nm/5 Nm/100 Nm/3000 Nm/10000 Nm
Digital torque sensor is on the basis of a rotary torque sensor, and then add a OLED rotary/speed/power meter. 0.1-10000 Nm digital rotary torque transducer adopts shaft to shaft structure. In automotive applications, digital rotary torque sensors are found in dynamometers, engine test stands, test benches, and endurance test stand.
500VA/1kVA/2kVA to 10kVA Voltage Stabilizer for Home
500 VA/1kVA/ 2kVA to 10k VA single phase AC automatic voltage stabilizer is based on relay control system & programmed control computerized technology for home purpose. It has many unique features which enable to give high performance, better reliability and save electricity.
Recessed Mud-In Linear Channels
The Mudr trimless recessed linear LED lighting channels feature a unique, patent-pending lens design allowing for even illumination across the entire surface of the lens from one edge to the other. Offered in two sizes, the trimless channels install flush into 5/8-inch drywall to provide seamless integration into ceilings and walls, resulting in clean lines of light. Mitre cuts are available through the Alloy LED customization program.
Multi V Water 5
Available from 6 - 48 tons, LG's Multi V Water 5 permits synchronous cooling and heating in different zones simultaneously, providing better occupant comfort zoning. Variable refrigerant flow technology using Inverter compressors and variable condenser water controls provide lower energy cost benefits to the customer. The Multi V Water 5 provides higher IEER and COP efficiency values than its previous models.
Water-cooled VRF system
Available from 6 to 48 tons, LG's Multi V Water 5 permits synchronous cooling and heating in different zones simultaneously, providing better occupant comfort zoning. Variable refrigerant flow technology using inverter compressors and variable condenser water controls provide lower energy cost benefits to the customer. The Multi V Water 5 provides higher IEER and COP efficiency values than its previous models.
ST1000 Groundwater Sampling Pump
QED Environmental Systems highlights its Well Wizard ST1000, which provides the high sample accuracy and proven reliability of QED’s Well Wizard dedicated bladder pumps in a smaller diameter format. The sampling device is the heart of every low-flow groundwater monitoring system. This is why the ST1000, which goes deeper than other pumps and has a durable construction, provides tremendous value to organizations with these systems.The ST1000, being 0.80” (20mm) OD, can sample wells as small as 1” diameter at depths over 600 feet (183m), which is far deeper than other small diameter bladder pumps.
1000W Power Inverter
1000 watt Power Inverter with 2000 watt peak power, input DC 12/24/48V from car, RV or battery, output pure sine wave AC voltage 100V/110V/120V/220V/230V/240V, frequency 50Hz±0.5Hz or 60Hz±0.5Hz. 1000W pure sine wave power inverter has a 5V/1A USB charging port for powering your phone, laptop, etc.
TLF100 PRO flush mount tower light
The TLF100 Pro with Pro Editor or IO-Link uses bright, multicolor RGB LEDs that enable customized indication possibilities, including color, flash, audible tones, and light intensity. From simple to complex indication requirements, the vast color and animation capabilities offered by these tower lights provide users with an almost limitless range of display options to communicate almost any condition.
Saginaw Enviro-Therm Series Enclosure Air Conditioners
AutomationDirect has added a new line of Saginaw enclosure air conditioners designed to efficiently keep the internal temperature of an electrical enclosure at a safe level, protecting the enclosed equipment from overheating and moisture damage. These air conditioners utilize closed-loop cooling to keep contaminants in the ambient air out of the enclosure and are perfect for applications where filter fans are not sufficient or where the ambient temperature is not adequate for a heat exchanger. Rugged, energy-efficient, and reliable Enviro-Therm air conditioners offer superior cooling capacity, up to 21,160 BTU/H, and are constructed with heavy gauge carbon or stainless steel.
ABD-Z2 Automatic Balancing Damper for Zone Register Terminals
The ABD-Z2 is the latest addition to Greenheck’s line of automatic balancing dampers that provide precise airflow regulation for energy efficient indoor air quality. The ABD-Z2 is an integrated automatic balancing damper (ABD) with an adjustable set point controlled by an electric actuator (24V or 120V). The unit can toggle between two pressure independent CFM set points; the low-flow setpoint maintains a constant minimum ventilation rate, while the high-flow set point provides boosted on-demand ventilation.
AlumaPlus® Anodized Aluminum
Lorin Industries, Inc., the global industry leader in the innovation and production of coil anodized aluminum, announces that its AlumaPlus® product meets longstanding and recent trends in the appliance industry, for the benefit of manufacturers. For years, in commercial spaces, stainless steel has held sway as the material of choice for a large number of different appliance types. The look of stainless steel is often chosen for its sleek appearance and easy complementarity with almost any other finish color for walls, cabinets, and accents.
Quick Fitting Copper
Quick Fitting Copper pure copper push fittings are the latest innovation in push connection technology for plumbing, heating, solar and irrigation applications. The patented design creates an instant connection in a few seconds with superior performance and sealing properties compared to conventional push-fit technology.Quick Fitting Copper offers a dual seal design, which addresses a common failure point for other push to connect fittings due to poor pipe deburring and offers better pressure performance over competitive push fittings. The outer seal protects the inner seal from degradation throughout the lifetime of the connection, and the design generates 100% more sealing surface than single seal designs. Quick Fitting Copper fittings are factory and independently tested to levels significantly above the industry’s stringent standards for plumbing and heating technology.
SmartlockPro® Self-Test GFCI Combination USB Type A/Type C In-Wall Charger
Leviton recently announced the introduction of its new SmartlockPro Self-Test GFCI Combination USB Type A/Type C In-Wall Charger. This device combines the trusted ground-fault protection of Leviton GFCI technology with two high-powered USB ports – one Type A port and one Type C port – to deliver maximum power for faster charging and up to two times more power than competitive devices.The 4.8A USB offers 24W of total power. Overcurrent protection on the two USB ports help protect electronics from receiving too much power, which can damage devices.
EasySwitch
EXAIR’s EasySwitch® Wet-Dry Vac simplifies the filter change process when switching from vacuuming a dry material to a liquid or vice versa. Utilizing minimal compressed air, the EasySwitch is a powerful pneumatic vacuum that is ideal for any application - wet, dry, light and heavy. The fast and simple conversion to vacuuming liquids is done by releasing one latch, removing the filter element and securing the latch.
Smoking detection system
By Jack O’Toole, President and Co-Founder FreshAirSensorA 400-room casino hotel had a problem with guests smoking in its rooms. The hotel frequently received complaints about the smells of cigarette and marijuana smoke. A security officer would walk the area or floor in question, trying to determine the source of the smoke.
Pxxx0S3N SIDACtors
Littelfuse, Inc. (NASDAQ: LFUS), an industrial technology manufacturing company empowering a sustainable, connected, and safer world, announced the new Pxxx0S3N SIDACtor® Protection Thyristor Series, which safeguards exposed interfaces in industrial and ICT applications, including RS-485 data interfaces and AC/DC power supplies. Providing equipment in harsh environments with increased protection from severe overvoltage transients assists designers in complying with regulatory requirements. Available in a compact, DO-214AB (SMC) package, the Pxxx0S3N SIDACtor series is designed to provide 3kA (8/20) high-power surge protection with low thermal accumulation during long-term overvoltage events.
CX-8/0 Crimp Inserts
There are several options when it comes to terminating wires for rectangular connectors. Axial screw termination is one of the most common methods in the industry. This method is suitable for field installation or maintenance because the connection is stable and secure.
Dual Auto Sensor Faucet & Motion Sensor Soap Dispenser in Chrome
Our Automatic sensor faucet and motion sensor soap dispenser is an elegant smart activation fixture that will fit seamlessly in any commercial restroom design project. It's easy to use touchless technology for smart and smooth handwashing. This touch-less motion sensor faucet reduces the transfer of germs by preventing cross-contamination and re-contamination of germs and bacteria by not touching the faucets or handles.
Dual Commercial Sensor Faucet & Automatic Touchless Soap Dispenser
Our Polished gold eye-catching design with horizontal lines design is both functional and appealing, the Polished gold sensor faucet has been developed with ease in mind. A polished gold sensor faucet has been developed with ease in mind. The electronic sensors are sensitive and intuitive to operate and the touch-free system means that you don’t need to worry about cross-contamination from germs.
Automatic Dual Touchless Sensor Faucet and Soap Dispenser
Minimize waste of water, by using the automatic faucet. Immediately reduces water waste by eliminating unnecessary and unattended water flow. The automatic faucet provides water only when needed.
Mixed Flow Square Inline Fan Line
Greenheck’s SQ mixed flow fan line featuring a unique combination of high efficiency, low sound, and ease of installation in a square housing design now includes a new outdoor option along with additional accessories and sizes. The SQ mixed flow fan can now be specified for ducted horizontal-mount outdoor applications when space constraints require a cost-effective rooftop-mounted unit. The outdoor option is base-mounted and includes a full cover over the unit to protect electrical components and prevent water entrainment.New accessories include inlet and outlet guards to protect against intrusions; these guards remove easily for maintenance and inspection.
IntelliPak 1 HVAC Rooftop Unit
Trane's IntelliPak 1 HVAC Rooftop Unit has been upgraded to meet the U.S. Department of Energy’s (DOE) 2023 minimum efficiency requirements and now comes equipped standard with the Trane Symbio 800 controller. The IntelliPak 1 delivers an industry-leading part-load efficiency rating of up to 18.5 IEER (Integrated Energy Efficiency Ratio), depending on the system configuration, and meets ANSI/ASHRAE/IES Standard 90.1-2019.
Air-Fi Wireless Sensors
Trane, a global climate innovator – is building on its commitment to deliver greater energy efficiency with Air-Fi Wireless Sensors for Trane / Mitsubishi Electric CITY MULTI® VRF. Building owners using Variable Refrigerant Flow (VRF) systems can now benefit from wireless sensing technology that enables enhanced, individualized comfort. Air-Fi Wireless Sensors, which integrate with Tracer SC+ or Tracer Concierge, are now compatible with Trane / Mitsubishi Electric VRF systems. Air-Fi Wireless Sensors uniquely detect and monitor temperature, humidity, occupancy, and Carbon Dioxide (CO2) from a single device.
Re-Verber-Ray REV Series
Winner of ET Foundation's Engineered Products Award. A revolutionary new product in the infrared marketplace, the REV Series is packed with innovative and patent pending features such as an adjustable reflector and pre-heated combustion air for unsurpassed flexibility and efficiency. Insulated air pockets reduce required clearances to combustibles, and the multi-configurable solid aluminum extruded reflector can be installed with Single Pass or Dual Pass geometry, allowing for models capable of achieving an Infrared Factor (IF) up to 15 and a Radiant Emission Value (REV) in excess of 110.
B-Line series KwikSplice cable channel
With an innovative dove tail splice design, Eaton's B-Line series KwikSplice cable channel is designed for fast installation, reduced complexity and improved versatility in a variety of industrial and commercial applications. Unlike other instrumentation channel trays, the KwikSplice cable channel can be cut and spliced at any point along the channel, helping reduce jobsite complexity when it comes to field modifications. It also comes in 20-foot spans requiring up to 50% fewer supports than shorter span cable channels, resulting in savings that often outweigh the cost of the cable channel entirely.
Ark Gard ENRX Receptacles
The Ark Gard ENRX explosion proof NEMA receptacles feature a new cover with a retrofit design, providing customers with the option to purchase the cover and install it on their existing back box to get the NEMA 4X rating. The new design provides a variety of options and allows customers to use our receptacle solution for broader applications in the most demanding conditions. Features New cover option provides NEMA 4X protection • Capable of broader temperature range Captive screws for Class I, Division 2 environments Design can be panel mounted.
Cable channel
With an innovative dove tail splice design, the B-Line series KwikSplice cable channel is designed for fast installation, reduced complexity and improved versatility in a variety of industrial and commercial applications. Unlike other instrumentation channel trays, the KwikSplice cable channel can be cut and spliced at any point along the channel, helping reduce jobsite complexity when it comes to field modifications. It also comes in 20-ft spans requiring up to 50% fewer supports than shorter span cable channels, resulting in savings that often outweigh the cost of the cable channel entirely. Eaton www.eaton.com.
Metal Frame Power Supplies
IDEC Corporation introduces a new line of products to its power supply family with its PS3V Series. These switching power supplies provide an excellent price/performance ratio and build upon the previous generation’s reputation for reliability and functionality, while adding new features like push-in connections for simplified installation. Electrical efficiencyThe PS3V power supply family accepts a wide input voltage range from 85 to 264VAC, and it provides an output of 5, 12, and 24VDC with capacities ranging from 15 to 150W, both depending on the model. Output voltage is user adjustable ±10%, and the 24VDC versions deliver efficiencies ranging from 83 to 88%. Flexible form factorA robust yet compact metal housing protects the PS3V power supply, and it can be mounted in four orientations, by direct panel mount or DIN rail bracket.
DT Fluid Cooler
An induced-draft, coil only closed-circuit cooling tower, the Marley® DT Fluid Cooler with Aero-X™ coil technology provides dry operation flexibility that fill/coil hybrid coolers cannot.1. Process fluid is pumped internally through the coils.2. Recirculating water is pumped from the collection basin to the pressurized distribution system and is evenly distributed over the coils.3.
PanelView Plus 7 Performance Graphic Terminal – Series B
The PanelView™ Plus 7 Performance graphic terminal has been significantly improved with the launch of Series B. The preceding Series A graphic terminal ran on Windows® CE 6.0 operating system, which is no longer fully supported by Microsoft. Also, the components used in the Series A product are aging and have a shrinking supply chain.
9395XC UPS
Eaton's 9395XC is designed to anticipate the growing needs for large power capacity in a small footprint in data centers, the new solution delivers reliable, flexible power protection for everything from hyperscale and multi-tenant data centers to enterprise and light industrial applications.
MSU-DFX Luminaire
Leviton Lighting brand Viscor recently announced they are launching a new Certolux MSU-DFX luminaire featuring 365DisInFxTM UVA technology designed to promote cleaner surgical suites. This is the first luminaire Viscor’s Certolux brand has released featuring 365DisInFx UVA Technology since Leviton Lighting brands announced they were licensing the technology for incorporation into their portfolio in 2020.“Our new MSU-DFX luminaire provides an innovative and highly effective UVA technology intended for operating rooms that can help reduce bacteria, which is the most common source of surgical site infections,” said Tim Stevens, director of product management, Certolux. “This unique technology combined within Certolux’s best-in-class surgical luminaire, provides superior illumination, disinfection, and simplicity.”The new surgical luminaire with DFX technology has the added benefit of 365nm UVA light. This technology provides a controlled amount of UVA light to reduce the bacteria on surfaces within surgical suites.
Residential Energy Recovery Ventilators for Multifamily Buildings
Greenheck’s new high-performance residential energy recovery ventilators (ERVs) provide balanced ventilation that improves energy efficiency and ensures multifamily projects meet code and exceed indoor air quality expectations. Four models are available with a variety of options and accessories and all offer Home Ventilating Institute (HVI) certified airflow.Both the ASSURE120 and SYNC110 offer a 50-130 cfm operational range in a compact low-profile design that simplifies installations with limited mechanical space such as bulkheads and drop ceilings. In addition, the SYNC110 is powered by two Electronically Commutated Motors (ECM) with adaptive, variable speed technology programmed to adapt to the static pressure associated with a dirty filter or core.
Anodized Aluminum
Lorin Industries, Inc., the global industry leader in the innovation and production of coil anodized aluminum, highlights its full range of anodized aluminum and ClearMatt® Architectural Class I finish. Lorin’s line of anodized aluminum is defined by its environmentally friendly and durable design, making it a sustainable solution that benefits both the planet and your next architectural project.From ceiling systems and signage to commercial appliances and interior automotive trims, Lorin anodized aluminum serves a wide variety of commercial applications. These metals can also be used for honeycomb panels, elevator trim and decorative panels, aluminum composite panels, standing seam roof systems, and decorative column colors.A heavy emphasis on environmental responsibility defines Lorin’s anodized aluminum.
Lithium SAFEFlex Charger
Lithium SAFEFlex Chargers complement Green Cubes Technology's market leading Lithium SAFEFlex Batteries. Green Cubes is the only manufacturer to offer enterprises both Lithium-ion batteries and affiliated chargers to the Material Handling industry, thus simplifying the electrification of Material Handling equipment. These chargers are offered in 15 Kilowatt (kW) and 30 kW models.
New Test Data – Neutralize Airborne COVID-19 Virus In ONE MINUTE with ActivePure
New Testing Shows ActivePure Eliminates 99.9% of Airborne COVID-19 Virus in Under 60 SecondsGame changing technology actively neutralizes surface and airborne pathogens including SARS-CoV-2 DALLAS (March 8, 2022) — New independent testing conducted by the University of Texas Medical Branch (UTMB), one of the world's top biosafety testing facilities, shows that ActivePure Technology inactivated over 99.9% of highly concentrated airborne SARS-CoV-2 virus—the virus that causes COVID-19—in an enclosed setting to below detectable levels in a 60 second testing period. This recent testing round shows definitively that the technology works even faster than previously indicated. ActivePure’s purifying technology provides 24/7 full-coverage air and surface disinfection by deactivating pathogens in the air and on surfaces.In 2020 after the first UTMB test, Dr. William S.
HEPA Filtered Clean Rooms
HEPA Filtered Clean RoomsHEPA Filtered Clean Rooms feature a modular construction design that is cost effective and time efficient compared to traditional construction. An entire laboratory workspace is pre-engineered including the structure and the lab furniture/fume hoods to outfit the interior. HEPA Filtered Clean Rooms wall panels have a white fiberglass surface for chemical resistance and excellent light reflectivity.
Biometric locking for server racks and electronic cabinets
EMKA continue to lead the cabinet security industry with their biometric “at the door” system for data centre racking and other sensitive data applications across the financial and public service environments, as well as for vulnerable industrial situations. Andy Billingham, MD at EMKA UK, pointed out that “Biometric locking is recognised as the ‘gold standard’ for physical data security, with one, two, three and four factor authentication. EMKA Biometric locking features ‘at the door’ identification which meets PCI DSS, HIPAA, FISMA and more.” He further explained that “Biometric Cabinet Access can be configured in a variety of ways – at the individual cabinet door and/or at the end of a row of cabinets – and feature a wide range of multi-factor authentication methods utilising fingerprint biometrics, RFID smartcard technology and PIN entry.”.
PowerLogic PFC Smart Capacitor Bank
This is a 'smart' capacitor bank for correcting power factor. What sets this device apart is the fact that it self monitors and sends alerts and notifications if maintenance is required or if a component of the capacitor bank is not working correctly. Therefore, the user will be alerted and can fix the issues before the capacitor bank fails and results in power factor penalties from the utility.
TrilliumSeries Adiabatic Cooler
This adiabatic cooler is ideal for applications that demand a combination of energy efficiency and limited water use. BAC’s innovative design maximizes both water and energy efficiency, ultimately minimizing costs. In addition, the TrilliumSeries Cooler is designed to make installation and ongoing maintenance simple.
BWA250 acoustic Luminaires and Panels
The BWA250 acoustic luminaires and panels by Birchwood Lighting combine exceptional sound dampening with seamless, pixel-free illumination to provide superior quality light and sound clarity for large open indoor environments. Reducing the noise level in a room is key for comfortable and efficient work environments. With the BWA250, building occupants can see and hear more clearly with minimal background noise, resulting in greater concentration and focus on what it is they are doing. With an NRC rating of 0.95, BWA250 lowers the noise level in a room by absorbing internal and external sound influences through the BW Acoustic material. Available in lit or non-lit configurations, 200 – 900 lm/W and an integral driver, the BWA250 is designed with advanced modern performance and industry-leading sound dampening. Available with direct/indirect illumination and a sustainable housing made from 60 percent post-consumer recycled content, Birchwood acoustic luminaires offer a responsible solution for open environments, such as open office spaces, schools and common areas. For additional information about the BWA250, please visit: https://www.birchwoodlighting.com/en/products/bwa250.
Xtreme Varistor series
Littelfuse, Inc. (NASDAQ: LFUS), a global manufacturer of leading technologies in circuit protection, power control, and sensing, today announced the Xtreme Varistor series. Constructed with a proprietary powder formulation developed by Littelfuse, these new, smaller varistors achieve robust surge performance that helps prevent damage, fire hazards, and catastrophic failure even under extreme circumstances.
FrostSheild
FrostShield is a revolutionary new mechanical and unit control technology that not only extends the operating range of air-source heat pumps, but also removes the need for the unit to enter defrost mode during heating operation. This feature extends the life of HVAC equipment, has the potential to save a tremendous amount of electrical energy, and improves occupant comfort.
Maxcess Drawer Slide System
Full access undermount allows users to get maximum access to drawer contents. Kernersville, N.C.: Grass America, a leading supplier of functional hardware to the cabinet industry, highlights its Maxcess drawer slide, a full access, soft-close undermount drawer slide series for frameless and face frame cabinetry. This full access undermount is economical and concealed, allowing users to upgrade their functional drawer hardware and achieve maximum access to their drawer’s contents.
IMS4000-E Infrastructure Monitoring System
The redesigned Infrastructure Monitoring System from Sensaphone tracks critical environmental conditions across data center infrastructures in multiple locations. The new IMS-4000E features a single-pane view of environmental and network equipment monitoring on an upgraded web-based user interface, increased security and boosted processing power. The new easy-to-use interface enables programming, data logging and access from any network-connected computer.
EPC600 Environmental Particle Counter for Indoor Air Quality Monitoring
MANCHESTER, NH, -- Triplett Test Equipment, a leading maker of test equipment tools, announces the Triplett Model EPC600 Environmental Particle Counter, a compact and portal tool ideal for indoor air quality (IAQ) testing in semi-conductor, pharmaceutical, data center, optics, aerospace, cleanroom, operating rooms and other sensitive applications. The quality of air in the environments that we work and breathe in every day plays a very important role in many different applications. The EPC600 can simultaneously measure 6 channels of particle sizes down to 0.3 microns (µm) of methane, propane, butane, ammonia, carbon monoxide, and many other substances.
Compact Cartridge Fuses with High-Current, High-Voltage Ratings
Littelfuse, Inc. (NASDAQ: LFUS), a global manufacturer of leading technologies in circuit protection, power control, and sensing, today announced the compact cartridge fuse series available that's rated at 500Vac/Vdc with current ratings from 40A to 63A and a 10,000A interrupting rating. The 607 Series high-current, high-voltage cartridge fuse, designed for overcurrent protection applications, provides a robust solution for demanding high-voltage power supply circuits. The 500V fuse rating is suitable for both AC and DC inputs.
A2L-compatible Tools
NAVAC, the world’s largest supplier of HVAC vacuum pumps in addition to a wide array of tools, gauges, charging machines, recovery units and industry-specific items, offers a complete line of tools compatible with A2L refrigerants, which are being phased in as part of greener industry initiatives. Since legacy HFC refrigerants such as R-410A will still be used on a scaled-down basis for the next decade or more, NAVAC’s portfolio of HVAC/R tools are designed to handle both newer and older refrigerants. Industry groups as well as manufacturers like NAVAC have been spreading the word about the pending phasedown, and developing solutions to ensure a seamless transition to more eco-friendly refrigerants.
CONFAST Flat Phillips 410 Stainless concrete screws
CONFAST® Flat Phillips 410 Stainless concrete screws are designed for a fast and easy installation with optimal holding strength and providing long-lasting rust resistance for exterior use. The anchor is made from 410 stainless steel, and is Silver Ruspert Coated. This anchor is designed for use in concrete, block and brick.
BACnet MS/TP fan controller
The destratification fan controller provides individual Airius fan control and status integration over the BACnet MS/TP network. Up to 63 fans can be connected per MS/TP network, and multiple networks can be created for integration of hundreds of fans. The new controller is easy to configure and install, with no software needed, enabling building owners and facility managers to monitor their Airius fan system, reduce their energy consumption and improve the comfort of their buildings.
Series UMC Universal Manifold Check Assembly
The Universal Manifold Check assembly (Series UMC) is the industry’s first UL-listed and FM-approved complete floor control manifold or shotgun riser assembly for wet-pipe sprinkler systems up to 300 psi | 2068 kPa, featuring all required components per NFPA 13 standards in one assembly and part code. With the most compact design in the market, the Series UMC saves valuable space in tight-quarter installations such as hallways, stairwell landings and alcoves. Key size- and weight-reducing features include the patented left- and right-hand mirrored drain ports and flow switch located below the check valve.
AquaEdge 19MV Water-Cooled Centrifugal Chiller with Magnetic Bearings
Carrier's AquaEdge 19MV was unveiled in January 2022 with capacity from 300 to 700 tons (1,055kW – 2,461kW), combining best-in-segment efficiency for design and the ability to operate at severe conditions due to unexpected building operation or extreme weather. It leverages Carrier’s proven EquiDrive two-stage back-to-back compressor technology, with magnetic bearings, providing expanded operating range while improving chiller energy efficiency and building resiliency. The AquaEdge 19MV can take full advantage of cold condenser water, chilled water reset and other energy-saving practices to further improve building performance.
Tankless rack system
The TTS Synergy Series offers a plug-and-play setup with a single point of connection each for water, power, gas, vent, condensate and building recirculation lines. This unique feature, coupled with integrated storage-tank options, sharply cuts on-site labor for faster, smoother turnarounds on commercial domestic water heating projects, new and retrofit. Its compact footprint and pre-manifold system present a worry-free installation, resulting in increased efficiency, cost and time savings.
Construction Reinforcement System
The former Aylmer Academy (170 Principale Street, Aylmer, Quebec Canada) is of Georgian Style Construction started in 1857 and the square Bell Tower was added in 1911. Following a fire in 1925 the original roof was replaced with a mansard style and a 3rd floor added. The building served as an English language educational lay transition facility from public school to college and university and was the equivalent of today’s high school – the region's first.
LED Tape Light Family
Alloy LED has increased the maximum run lengths of its high-quality PrimaLine tape lights up to 82 feet. Featuring an innovative circuit design, the tape lights maintain the same brightness level throughout the length of the tape, from the beginning to the end of the run, for the best performing tape lights on the market.In addition to the high light quality from end to end, the extended run lengths save electricians installation time and money – by up to 50% – by reducing the need for multiple drivers and power leads. Ideal for larger coves, hallways, retail displays and other long run applications, the new pioneering design is being introduced on Alloy LED’s most popular PrimaLine DC tape lights, including the PrimaLine 1.5 (12V and 24V), PrimaLine 3 (12V and 24V) and the PrimaLine 1.5 XT and 3 XT long run tape lights.The new maximum run lengths include:PrimaLine 1.5 Tape Lightso 24V = 67 feeto 12V = 34 feetPrimaLine 1.5 XT Long Run Tape Lightso 24V = 82 feetPrimaLine 3 Tape Lightso 24V = 33 feeto 12V = 21 feetPrimaLine 3 XT Long Run Tape Lights o 24V = 50 feetThe UL Listed PrimaLine tape lights are offered in multiple lumen outputs, color temperatures and industry-leading high 95+ CRI options. The LED products also feature high R9 and R13 values for superb rendering of warm tones.
Tyco LFII 4.9K Lead-Free Sprinkler
The Tyco LFII 4.9K Lead-Free Sprinkler is the first ANSI/UL 199 Approved polymeric fire sprinkler to offer long-lasting dependable protection for residential buildings specified under NFPA 13D and 13R. The sprinkler is manufactured with a polymeric material that carries anti-heat and anti-corrosion properties that extend the life and value of the sprinkler compared to similar brass products. The sprinkler is certified to NSF 372 and NSF 61 to ensure compatibility with safe drinking water and lead-free plumbing requirements.
IMBA-Q470-R10
With the IMBA-Q470 ICP Germany offers an industrial ATX motherboard, which has a multitude of fast expansion interfaces. PCI Express is available in the efficient and fast version 3.0 and offers transfer rates of almost 16GByte per second. This makes the interface almost four times faster than the first PCI Express version and nearly twice as fast as its predecessor.
Luminary metal-clad cable
The original patented MC-PCS cable, MC Glide Luminary, with both power and control circuits under one armor expanded into the unique armor profile MC Glide Luminary Lite and MC Glide Luminary Tuff. The unique armor profile of MC Glide Luminary Lite and Tuff reduces friction and glides easily without sacrificing flexibility and strength, saving time and labor costs compared to traditional metal clad cable. Meeting all requirements of UL 1569, MC Glide Luminary Lite and Tuff are equal to the flexibility of traditional metal clad cables and are compatible with the installers' current tools and fittings, which saves time and money. Atkore www.atkore.com.
Split data center cooling system
SyCool SYS500 is a highly efficient thermosyphon-based split data center cooling system. Server heat evaporates liquid refrigerant within the thermosyphon, which passively travels to the condenser (by differential refrigerant pressure) where it is condensed back to a liquid. High heat transfer effectiveness enables superior economization.
AmpChamp RGB and RGBW Tape Light Connectors
The AmpChamp family of RGB and RGBW terminal connectors are the industry’s first UL Recognized terminal connectors for color-changing tape lights. Featuring a unique, patent-pending design, the connectors offer secure, fast and reliable tape light to wire connections, while accommodating tape lights as narrow as 0.4 in. (10 mm).
Ceiling-cassette indoor unit
LG's DUAL Vane 4-Way Cassette is a ceiling-mounted unit offering four-way air flow. The LG DUAL Vane Cassette offers a duct-free option with an aesthetically pleasing design. The unit's dual louvers and fan features allow for even air distribution in large, open spaces.
B-Line series BBT-HF telescoping bracket
Eaton's BBT-HF telescoping brackets and alignment plates help speed installation and reduce complexity for rough-in projects. Simply snap one side of the BBT-HF bracket to the wall stud, slide the B-Line series BBT-HF telescoping bracket to the width required, snap the other side of the bracket to the stud, then secure with screws. The brackets are self-leveling, feature an auto-height adjustment and easily adjust to accommodate stud widths of 14½" thru 25" for a secure fit.
Tyco ESFR Rapid Install Sprinkler (RIS)
Johnson Controls offers two Tyco early-suppression, fast-response (ESFR) Rapid Install Sprinklers (RIS) for protection of warehouse and storage facilities. The Model ESFR-22 and Model ESFR-25 pendent sprinklers, and their accompanying custom welded outlet fitting, simplify installation for fire protection contractors by featuring pre-installed rubber gaskets and a thread connection that can be installed by hand with no need for tools, tape or sealant. Both sprinklers provide warehouse design flexibility by eliminating the use of in-rack sprinklers when protecting high-piled storage.
Radialux Neon Color-Changing Tape Lights
Replicating the look of traditional neon, the Radialux RGB-W Neon Tape Lights feature an ultra-flexible, IP67-rated silicone housing with a unique built-in diffuser and industry-leading 95 color rendering index (CRI) for the white LEDs, allowing for continuous, high-performing, even illumination. These next generation color-changing LED linear lighting solutions feature a tight bend radius available in top-bending (Radialux Neon 200 TB) and side-bending (Radialux Neon 100 SB) designs to mimic the curves of traditional neon lights for endless design possibilities. With lengths up to 16.4 feet, the fully encased, rugged silicone housing is IP67 wet location rated, satisfying both indoor and outdoor commercial and residential applications.
Steel-armored cable
MC Glide Tuff steel armored cable joined the MC Glide cable product family in August of 2021. The interlocked steel armor design, with phase ID, provides a faster installation experience for the installer. Engineered to reduce the likelihood of the cable seizing up when pulling through metal studs and drop ceilings, this unique armor profile is smoother, flatter, easier and quieter to work with.
Electrical RT 2.0
Electrical design software for Revit.
PowerLine 300 Driverless LED Tape Light
The PowerLine™ 120V AC LED Tape Light family offers the highest quality ETL Listed direct-connect LED lighting, with the most configuration options, on the market today. PowerLine 300 is a high output, plug-in or hard-wire model that can be specified to a custom length in 12 inch increments. The PowerLine 300 is a perfect complement to the existing PowerLine product line-up as it features ultra-long runs (up to 164 feet) and a new tighter diode pitch for reduced hot spots.
Lightolier 3D printed lighting
Signify’s Lightolier 3D printed lighting product portfolio blends design flexibility with sustainability. These fixtures can be tailored to meet a variety of applications or any interior style – you have the freedom to choose the luminaire’s colors, textures, shape, size and light engine outputs. These 3D printed fixtures are also designed to reduce waste: we’ve eliminated traditional mold/cast tools, have the ability to reuse raw materials and use a lightweight polycarbonate material to produce the products, ensuring that they are recyclable to support the circular economy.
CREST with Hellcat Combustion Technology
The CREST Condensing Boiler with Hellcat Combustion Technology features RealTime O2 Trim. This combustion technology includes Feed Forward, Feed Back, Commissioned Trim and Learned Trim to allow the user to set tailored parameters, so the unit can run at peak performance around the clock without needing to make manual adjustments. CREST boilers with Hellcat Combustion Technology feature an O2 sensor exclusively designed for a condensing, hydronic boiler, along with Lochinvar’s SMART TOUCH operating control that adapts to rapidly changing environmental conditions.
IP-X pressure control valve
The Oxford Flow IP-X Series is a unique, patented range of pilot-controlled axial flow pressure regulators developed specifically for water applications in a range of configurations, including pressure reducing, sustaining, sustaining/relief and tank level control. Learn more about the Oxford Flow IP-X pressure control valve.Learn more about other Oxford Flow IP series liquid pressure control valves.
Interact Pro Scalable System
Signify’s Interact Pro scalable system makes your smart building journey easy and cost-effective. You can get started on day 1 without any IT support by simply installing and connecting Interact Ready luminaires, retrofit kits and lamps with integrated sensors and get the benefit of deep energy savings from unique behaviors like adaptive dimming and dwell time. With an intuitive configuration app, you can fast-track the system setup, spend less time on-site, and turn over the project quickly, while minimizing labor costs.
Saniswift Pro
The IAPMO listed Saniswift Pro drain pump is used to pump gray water away from a variety of both residential and commercial applications. Its pump design offers quick installation in hard-to-reach, below-sink spaces. There is a water-detection sensor to reduce system failures.
100-1 Turndown Variable Orifice Plate Air Terminals
Patented Variable Orifice Plate Technology Air Terminal units featuring a 100-1 turndown with flow accuracies to within a few cfm regardless of pressure fluctuations. Futureproofs a building with user centric hybrid flex space without costly mechanical upgradesAccelerates the project schedule by up to 6 monthsEach unit Ships with a 700- point factory commissioning reportEliminates filed k-factor commissioning adjustments Single size units replaces multiple vav air terminal sizes and critical environment air valves. Simplifies engineering design and mitigates risk.
TowerShield 121
TowerShield 121 is a 99% active all organic LIQUID Water Treatment Ultra Concentrate, for control of Calcium Carbonate and other scaling agents. It is a severe service corrosion inhibitor for Steel, Copper, Brass, Zinc and alloys of these materials.
onPoint
onPoint is cloud-based analytics that enable building operators, contractors and owners to stay on top of the most valuable aspects of their portfolios. With a focus on occupant comfort and health, system-wide energy use and ongoing operations, onPoint is a comprehensive building analytics package that delivers better, more reliable data.
IOT Jetstream
IOT Jetstream is a smart building integration platform that empowers the delivery of innovative solutions for the built environment with a developer-friendly API. Bring cloud and on-premises building systems, equipment, and applications together with a unifying data model. Unlock building data, enable interoperability, and reduce the amount of time it takes to gain insights into building operations.
DCD High-Lumen 4-inch Downlighting Series
The DCD Series brings together robust lighting capability and a highly modular system that radically simplifies configuration in the field. With just one housing type, you can change optics, lumen outputs, or switch to an adjustable. The series is flexible enough to illuminate an entire project with a broad range of light and aesthetics options, all with just one housing.
DRD5S 8-inch Surface-Mount Downlight
Designed to blend seamlessly into the ceiling, the DRD5S 8-inch LED surface-mount downlight extends only 0.6 inches below the ceiling plane to minimize its visual profile. Packed with technical breakthroughs, the ultra-thin DRD5S 8-inch downlight matches the elegance and performance of a high-end recessed downlightwith a specialized lens that transmits clear, beautiful light with a subtle diffusion – all at an affordable price. The all-in-one DRD5S was engineered from the ground up. From its highly efficient light engine and cutting-edge optoelectronic design to its simple snap-in installation process, the performance and versatility allows it to work with more applications, including those with limited plenum space. Simply put, the DRD5S combines the best aspects of recessed lighting and surface mounts into one remarkably small package. The surface downlights feature 90+ CRI and produces up to 1500 lumens while delivering pure, smooth illumination that transforms spaces while disappearing into them. A proprietary driver provides smooth dimming down to 1% and optional integrated test switch is available for emergency lighting. When paired with the SurfaceFrame™, the DRD5S installs into just 2" of plenum space and meets the requirements of the most demanding environment.
DRD5S 18-inch Linear Surface-Mount LED Area Light
Designed to blend seamlessly into the ceiling, the DRD5S 18-inch Linear LED surface-mount area light extends only 0.6 inches below the ceiling plane to minimize its visual profile. Packed with technical breakthroughs, the ultra-thin DRD5S 18-inch downlight matches the elegance and performance of a high-end recessed downlight with a specialized lens that transmits clear, beautiful light with a subtle diffusion – all at an affordable price. The all-in-one DRD5S was engineered from the ground up.
4-inch Round and Square Surface-Mount Downlights
Designed to blend seamlessly into the ceiling, the DRD5S 4-inch LED surface-mount downlights are available in both round and square configurations and extend only 0.6 inches below the ceiling plane to minimize its visual profile. Packed with technical breakthroughs, the ultra-thin DRD5S matches the elegance and performance of a high-end recessed downlight with a specialized lens that transmits clear, beautiful light with a subtle diffusion – all at an affordable price. The all-in-one DRD5S was engineered from the ground up. From its highly efficient light engine and cutting-edge optoelectronic design to its simple snap-in installation process, the performance and versatility allows it to work with more applications, including those with limited plenum space. Simply put, the DRD5S combines the best aspects of recessed lighting and surface mounts into one remarkably small package. The surface downlights feature 90+ CRI and produces up to 1000 lumens while delivering pure, smooth illumination that transforms spaces while disappearing into them. A proprietary driver provides smooth dimming down to 1% and optional integrated test switch is available for emergency lighting. When paired with the SurfaceFrame™, the DRD5S installs into just 2" of plenum space and meets the requirements of the most demanding environment.
IP-K pressure control valve
The Oxford Flow range of IP-K pressure reducing valves (PRVs) are ideal for mobile hydrant service and come complete with integrated handles, feet and quick-fit connections. Learn more about the Oxford Flow IP-K pressure control valve.Discover more products in the Oxford Flow IP series liquid regulator valves.