XG-AFL Series Linear Diffusers
Greenheck's XG-AFL Series of architectural high-capacity linear slot diffusers are designed for ceiling and sidewall installation in variable volume or constant volume air distribution systems. Available in single-section lengths up to 96 inches with one or two slots, versatile XG-AFL Series diffusers can be specified in various frame types and eight border configurations to complement any interior. Combination frames are also available for applications that require two different frame types on a single linear.
AX 200 series tubular inline and upblast fans
Greenheck has expanded its tubular inline fan product offering with the addition of the AX 200 Series tubular inline and upblast fans. Featuring medium-duty welded construction, a cast aluminum prop, and integral flanges for airtight duct connections, the direct drive AX 200 can be utilized in a wide variety of indoor or outdoor applications. The AX 200 upblast fan also incorporates a heavy-duty spun curb cap to reduce inlet losses, a butterfly damper section for backflow prevention, and a windband section to protect the butterfly dampers from debris.
Mobile containment unit for infection control in the healthcare industry
REMEDI8®, the national leader of fire protection and health and safety systems, highlights its HEPA-10X for infection control in high-risk healthcare settings. The HEPA-10X has been expertly designed for effective control and maximum efficiency. Its interior and exterior powder coating not only enables easy cleaning and maintenance but also maximizes the system’s durability, ensuring longevity.
M Series Commercial 4-inch Downlighting Collection
From grand outdoor entrances to lobbies, restaurants and guest rooms, the 4-inch aperture M Series Commercial recessed downlighting family meets all site requirements for a wide variety of applications with lumen packages ranging from 750 to 3500, while providing continuity in aesthetics and performance throughout varying ceiling heights. The design community now has one unique modular family to meet all application needs. The modular design with interchangeable modules, optics and trims, allow for easy serviceability and design changes, as they can be easily swapped onsite from below the ceiling from fixed to adjustable to wall wash. The modular design (housing, module and trim) of DMF products is an ideal serviceability solution as the drivers are integrated into the light engine modules versus the housing, so modules, equipped with quick connects, can be easily swapped out with below ceiling access, making serviceability quick and easy. The M Series Commercial non-insulated ceiling (IC) housings are offered in round and square apertures. The modules include Fixed Downlight and Adjustable (360-degree rotation and 40-degree tilt) and the tool-less field-interchangeable optics include 15-, 25-, 40-, 60- and 90-degrees distributions.
i-Vu Weather Forecasting Add-On
Carrier i-Vu weather forecasting add-on for the i-Vu building automation system enables intelligent control strategies based on real time outside air quality data, helping buildings adapt to changeable climate conditions. The i-Vu building automation system communicates with leading weather forecasting agencies, AccuWeather, the U.S. National Weather Service and Environment Canada, with the weather add-on. Ten-day hourly weather forecast data can be used to optimize energy efficiency indoors and the use of water in irrigation systems outdoors.
Solid polymer electrolyte to operate across a wide temperature range
Nuvvon's creation of a novel solid polymer electrolyte enables solid-state pouch cells to operate across a wide temperature range without external cooling or heating systems. The next-generation technology dispels the myth that solid polymer electrolytes have poor ionic conductivity at room temperature. Completely dry and not requiring the addition of ceramic materials, Nuvvon’s solid polymer electrolytes withstand temperatures of 212°F (100°C) without mechanical degradation and possess high ionic conductivity across a wide temperature range (2.2*10-4 S/cm at 32°F (0°C), 4.6*10-3 S/cm at 77°F (25°C), 6.6*10-3 S/cm at 176°F (80°C)). They are ionically conductive at room temperature and atmospheric pressure without liquids or gels and are compatible with lithium metal anode and high voltage cathodes. Applications of Nuvvon Polymer Technology Nuvvon’s unique polymer technology is designed for solid-state batteries used within high-power density and demanding applications such as consumer electronics, and electric vehicles.
22HL-50 Leak Detector Sensor
Belimo's 22HL-50 Leak Detector Sensor is engineered to detect liquid leaks in containers, drain pans, false floors, suspended ceilings and rooms. It features a single relay contact that can be wired to alert a control system, trigger an alarm, or close a valve to halt the flow of liquid. It has easy to read green/red “traffic light” status LEDs for clear visual indication of leaks.
Tripp Lite series Standby UPS
Providing simple, cost-effective power protection and battery backup, the new UPS is a compact, low-maintenance solution for applications such as retail point-of-sale (POS) systems, home networking equipment and bank ATMs. Built to operate in areas with uncontrolled temperature or humidity, the Eaton Tripp Lite series standby UPS offers durable construction, automatic restart after an outage and a variety of mounting options. Available in three models, the standby UPS is a versatile battery backup for SMBs and retail enterprises and is suitable for applications that include work-from-anywhere, casino gaming, classrooms and more.
Optically isolated photovoltaic driver provides floating power source
Littelfuse, Inc., an industrial technology manufacturing company empowering a sustainable, connected and safer world, announced the launch of the FDA117 Optically Isolated Photovoltaic Driver. This innovative product generates a floating power source, making it an exceptional choice for isolated switching applications in a wide range of industries. The FDA117 is specifically designed to control discrete standard power MOSFETs and IGBTs using a floating voltage source, ensuring isolation between the low-voltage drive input side and the high-voltage load output side. With an input control current range of 5 mA to 50 mA, an integrated fast turn-off circuitry, and 5 kVRMS reinforced isolation, the FDA117 provides sufficient voltage and current to drive discrete power MOSFETs and IGBTs effectively. One of the key differentiators of the FDA117 is its ability to generate a floating power source with up to 15.3 V voltage and 60 µA current, making it suitable for driving standard MOSFET devices and IGBTs.
eCAPS Bridge to Revit plug-in
Greenheck’s eCAPS Bridge to Revit plug-in allows users to seamlessly select and schedule Greenheck HVAC equipment without leaving the Revit environment. The eCAPS Bridge release includes access to additional Revit® content and more functionality. Dedicated outdoor air systems (DOAS) LOD 300 content can now be selected by performance.